Related Manuals for LEGENDEX ROGUE M.O.L.L.E MR-MP-COL-1
Summary of Contents for LEGENDEX ROGUE M.O.L.L.E MR-MP-COL-1
- Page 1 LEGENDEX ROGUE M.O.L.L.E PRODUCT CODE: MR-MP-COL-1 Holden Colorado Dash Panel Kit LEGENDEX.COM.AU (07) 3203 2333...
-
Page 2: Tools Required
M4 X 30mm PH2 Button Head Screw TOOLS REQUIRED Phillips Head screwdriver Small Spanner Drill and Bits IMPORTANT Wear protective clothing including eye wear. Clean Hands work best. Disconnect the Battery to ensure you don’t earth out. Or Use an Auto- electrician. LEGENDEX.COM.AU (07) 3203 2333... - Page 3 Place MOLLE panel on top of lid in desired location and mark mounting holes with a felt tip pen STEP 3 Open lid and remove front screws shown in image STEP 4 Remove front dash facia LEGENDEX.COM.AU (07) 3203 2333...
- Page 4 4.5mm drill bit. Assemble the MOLLE panel with provided spacers to your preferred height STEP 7 Fit and tighten the supplied nuts to the back of the Dash lid LEGENDEX.COM.AU (07) 3203 2333...
- Page 5 INSTALLING YOUR NEW ROGUE M.O.L.L.E STEP 8 Re-install hinge plate and lid to the dash STEP 9 Re-Assemble the facia and fit you favourite accessories STEP 10 Fit and tighten the supplied buts to the back of the Dash lid LEGENDEX.COM.AU (07) 3203 2333...
- Page 6 NOTES THANKS FOR CHOOSING A LEGENDEX PRODUCT If you’re on Facebook be sure to join the Legendex nation facebook group to show off your rig, share your knowledge and support other legends who share the same passion for getting off road and exploring Australia.
Need help?
Do you have a question about the ROGUE M.O.L.L.E MR-MP-COL-1 and is the answer not in the manual?
Questions and answers