Philips QuadraAction 7864XL Manual page 16

16
10
9 Press down and turn wheel clockwise until it locks into
place.
Replace the Razor Head Assembly back on razor.
If the razor heads have been properly inserted, a shiny
circle is visible in the middle of the razor head assembly.
CLEANING
Once A Month: Razor Heads
For optimum performance, razor cutters and combs
should be cleaned in a degreasing liquid (e.g. Norelco
Razor Cleaner, model RC1776, or alcohol ) and
lubricated, with Norelco Razor Lubricant, model AL80, or
one drop of mineral oil (in the center of the head).
Every Six Months:Trimmer
1 Turn razor OFF.
2 Push Trimmer Slide Switch up to pop up Trimmer.
3 Clean Trimmer with the brush.
4 Lubricate the Trimmer teeth with Norelco Razor
Lubricant (model AL80) or with one drop of mineral oil.
5 Close Trimmer by sliding Trimmer switch down.