Do you have a question about the D-168 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for VEVOR D-168
Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRIC BREAST PUMP MODEL:D-168 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 3
Warning-To reduce the risk of injury, user must read instructions manual carefully. Warning: It means that due to a mistake,death or serious injury could result Danger: Indicates that due to misoperation, death and injury may occur This product is subject to the provision of European Directive 2012/19/EC.
and do not use bleach, chemical disinfectant solutions/tablets, steel wool, abrasive cleaners, or corrosive liquids (such as gasoline, acetone, or alcohol)To clean this product. When disassembling or installing components such as tees, silicone horns, bell mouths, silicone cylinders, duckbill valves, etc., caution should be exercised and excessive force should not be used.
Tee, cylinder head, dust cover, 180ml wide mouth GB 4806.7-2016 -10~100°C milk bottle, bottle cap Silicone horn, silicone cylinder, pacifier, duckbill silica gel GB 4806.11-2016 -10~180°C valve Product Introduction product name electric breast pump Model D -1 6 8 Main materials A B S, silicone, P P Executive standards QB/T 5136...
3. The control panel is designed with a touch screen, displaying the interface and making the operation process clear at a glance. 4. The host is equipped with a built-in battery, making it easy to use during power outages or when going out from home. Component Description Serial Compo...
Attention: Please check if the components are complete before use. Installation instructions Reminder: Before each use, components that come into direct contact with breast milk should be disinfected in advance: milk bottles, silicone horns, three-way silicone cylinders, duckbill valves, and bottle caps. Installation steps:...
Page 8
1. Insert the silicone horn and horn mouth in sequence before inserting the dust cover. 2. Insert the silicone horn and horn mouth components into the tee to ensure they are in place. (Note: When disassembling, hold the tee with one hand and swing the trumpet assembly up and down slightly with the other hand, and gently pull it out.) 3.
Page 9
5. Screw the tee assembly into the bottle. 6. Insert the straight connectors of the hoses into the cylinder head and the relative hole positions of the host machine to ensure that they are installed in place without air leakage and can be used. (Note: Before inserting the straight connector into the air duct hole of the host, the dust plug must be removed first.
Page 10
Power on/mode switching ·Tap the " " button for 2 seconds to turn on the device and enter biomimetic mode by default. ·After turning on, the breast suction/biomimetic /massage/lactation mode can be switched. Night operation switching ·Press the power button to turn off the screen light; Press the power button again and the screen light will light up.
·When powered by the built-in battery, the LED screen displays" " the battery level in real-time and statically; Powered by charging line When charging, in the shutdown state, " " dynamically displays the battery charging status in real time. · When the battery level drops to the minimum limit, the rightmost cell of the battery symbol "...
· In the shutdown state, connecting the power adapter can charge the battery; After being fully charged, it can work continuously for more than 3 hours· When the battery level is too low, the host automatically stops working and prompts to protect the battery;...
·The charging/power supply of the host/battery requires the use of a designated DC5V power adapter or mobile phone power adapter. Do not use other non-standard power adapters for charging/power supply. ·Do not approach high temperatures or ignition sources during the use and placement of the host.
Battery This table is prepared in accordance with the provisions of SJ/T 11364. “O” indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit requirements specified in GB/T 26572. “X” indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572, but is marked as' X 'in the table above“...
Page 15
the party.responsible for compliance could void the user's authority to operate the product. Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 16
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the D-168 and is the answer not in the manual?
Questions and answers