Advertisement
All manuals and user guides at all-guides.com
Password Protection: [On] / [Off] (default). Select and press OK button to
confirm.
Set the power-on password of the camera. The password is four digits, each
digit ranges from 0 to 9. Attention: If you set the password, write it down to
make sure that you do not forget it!
Forgot password? Contact: support@technaxx.de
Beep Sound: [On] / [Off] (default). Select and press OK button to confirm.
Open den Beep sound menu to turn On or Off the confirmation sound of the
buttons.
Format Memory Card: [Yes] / [No] (default). Select and press OK button to
confirm.
Attention: Formatting the memory card (FAT 32) will delete all data
permanently. Before using a new memory card or a card that has been used in
another device previously, please format the memory card.
Serial No.: [On] / [Off] (default). Select and press OK button to confirm.
Set the unique serial number for the camera. The number is four digits, each
digit ranges from 0 to 9.
Reset Settings: [On] / [Off] (default). Select and press OK button to
confirm.
Restore the camera to factory default settings including password, serial
number and so on.
Version: Look up the Firmware information of the camera.
Take Photos, Record Video, Playback: Switch the Mode Button to "Test". In
this mode, you can take photos, record video and playback files manually.
Take Photos: Press Capture button to switch to photo mode. Press Shot
button to take a picture.
Record Video: Press Video button to switch to video mode. Press Shot
button to start to record a video clip. Press Shot button again to stop
recording.
Playback: Press Playback button (10) to enter the playback interface.
Press Up/Down button to scroll through photos or videos. When you want to
playback video, press OK button to play the video. Press OK button again to
have a pause. Press Menu button to stop playback. Press Playback button (10)
again to exit the playback mode. Under "Playback" press the Menu button
7
Advertisement
