Page 1
2.0 AMP PALM SANDER MODEL HAPS020 ATTACH YOUR RECEIPT HERE Serial Number _____________________ Purchase Date ______________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) & 10:00 a.m. – 6:00 p.m. EST (Saturday and Sunday).
Please read and understand this entire manual before attempting to assemble or operate this product. If you have any questions regarding the product, please call Hammerhead customer service at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) &...
Page 4
IMPORTANT: This tool should only be serviced only by a qualified service technician. IMPORANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS-This manual contains important safety and operating instructions for palm sander Model HAPS020. DANGER To reduce the risk of fire or electric shock, carefully follow these operating instructions.
Page 5
SAFETY INFORMATION • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Page 6
SAFETY INFORMATION • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. • Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
Page 7
SAFETY INFORMATION Service • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Additional safety warnings • Unplug the sander before changing accessories. Accidental start-ups may occur if sander is plugged in while changing an accessory.
Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts. • Risk of injury to user. The power cord must only be serviced by a HAMMERHEAD Factory Service Center or Authorized HAMMERHEAD Service Station. PREPARATION Before attempting to use the palm sander, familiarize yourself with all of its operating features and safety requirements.
OPERATING INSTRUCTIONS 1. Selecting the right grade of sanding paper Different grades of sanding paper can be purchased from the store where you purchased the tool. Available grades are: Coarse, Medium and Fine. Use a coarse grit to sand down rough finishes, medium grit to smooth the work and fine grit to finish off.
Page 11
OPERATING INSTRUCTIONS To attach hook&loop type abrasive sheet a). Select the required grade of abrasive sheet. b). Remove any dust or debris from the hook and loop of the base. c). To attach hook & loop type abrasive sheet simply align the holes in the abrasive sheet with the holes in the sanding base and press firmly into place.
Page 12
OPERATING INSTRUCTIONS 5. LED Worklight This palm sander is equipped with a dust- sealed ON/OFF rocker switch, located on the front of the handle. a) Switch the sander on by pressing the “I” mark of the on/off switch. b) To turn off the sander, press the “O” mark of the on/off switch.
CARE AND MAINTENANCE WARNING: • Always disconnect the device before performing any adjustment or maintenance operation. if the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. •...
EXTENSION CORDS WARNING: If an extension cord is necessary, a cord with adequate size conductors that is capable of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3-wire extension cords that have 3-prong plugs and receptacles.
TROUBLESHOOTING Suspected malfunctions are often due to causes that the users can fix themselves. Therefore, check the product using this section. In most cases the problem can be solved quickly. WARNING: Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly qualified specialist if you cannot solve the problem yourself! PROBLEM...
This Palm sander is warranted to the original purchaser from the original purchase date for 24 Months, Hammerhead consumer portable power tool models will be free from defects in material or workmanship for a period of ninety days if the tool is used for professional use.