Do you have a question about the 1215 and is the answer not in the manual?
Questions and answers
Joe Collari
June 2, 2025
How to replace the drive belt
1 comments:
Mr. Anderson
June 2, 2025
To replace the drive belt on a Cub Cadet 1215:
1. Remove the spindle belt covers. 2. Release the spring tension from the idler pulley. 3. Remove the old drive belt. 4. Install the new belt around the pulleys as shown in Figures 44, 45, and 46. 5. Ensure the belt is in the lower groove of the center pulley. 6. Push against the idler pulley to aid installation. 7. Reinstall the spindle belt covers and hardware.
Need help?
Do you have a question about the 1215 and is the answer not in the manual?
Questions and answers
How to replace the drive belt
To replace the drive belt on a Cub Cadet 1215:
1. Remove the spindle belt covers.
2. Release the spring tension from the idler pulley.
3. Remove the old drive belt.
4. Install the new belt around the pulleys as shown in Figures 44, 45, and 46.
5. Ensure the belt is in the lower groove of the center pulley.
6. Push against the idler pulley to aid installation.
7. Reinstall the spindle belt covers and hardware.
This answer is automatically generated