Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ferm Ancora Wall Lamp 100
Summary of Contents for Ferm Ancora Wall Lamp 100
- Page 1 Ancora Wall Lamp 100 Assembly manual...
-
Page 3: General Instructions
– The product may in no way be modified or tampered with. Any modification may compromise safety and make the product itself dangerous to use. FERM LIVING does not accept any responsibility for products that have been modified. -
Page 4: Needed Tools
Needed Tools Phillips head screwdriver Spirit level... -
Page 5: Box Content
Box Content 1 x Small slotted screwdriver 1 x Lamp Shade 1 x Allen key 1 x Lamp Base Lamp shade screw Set screw Screws for wall Wallplugs... -
Page 6: Assembly Process
Assembly Process Drill a hole for the rawplugs and screw then hang the lamp on the screw. The screw must not be screwed in completely. - Page 7 Assembly Process Drill hole Drill hole Adjust the lamp so that it is centered on the wall. (Use spirit level) Use the bracket to mark the two holes´positions. Drill the holes and insert the rawplugs and screws.
-
Page 8: Hardwire Connection
Assembly Process HARDWIRE CONNECTION Drill hole Drill hole Optional hardwire connection: Cut the cable and install your own terminal block and connect the cables to the wiring from the house... - Page 9 Assembly Process Pull the cover over the wall bracket. Tighten the set screw with the slottet screwdriver.
- Page 10 Assembly Process BULB NOT INCLUDED Insert two light bulbs E27 in socket.
- Page 11 Assembly Process Mount the lamp shade.
- Page 12 Assembly Process Insert screw at the top of the lampshade...
- Page 13 Assembly Process Insert screw at the bottom of the lampshade...
- Page 14 fermliving.com...
Need help?
Do you have a question about the Ancora Wall Lamp 100 and is the answer not in the manual?
Questions and answers