Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ECOCOLD APPLE Series
- Page 1 APPLE SERIE GROUP OF CHESTFREEZER USER GUIDE NEGATIVE CHESTFREEZER APPLE 150 APPLE 188 APPLE 188 FG APPLE 212 APPLE 212 FG APPLE 250 APPLE HEAD APPLE HEAD FG POSITIVE CHESTFREEZER AAPPLE 150 APPLE 188 APPLE 188 FG APPLE 212 APPLE 212 FG APPLE 250 APPLE HEAD APPLE HEAD FG...
-
Page 2: General Information
COVER CONTENTS GENERAL INFORMATION ABOUT THE COOLER GENERAL APPEARANCE OF COOLER ATTENTION INSTRUCTION FOR CARRYING INSTRUCTION FOR INSTALLATION 9-10 ASSEMBLY OF THE COOLER USAGE OF THE COOLER BEFORE CALLING THE SERVICE CLEANING AND MAINTENANCE CONTACT NUMBER... - Page 3 Dear customer; This chestfreezer which has successfully passed from quality control Ecocold A.S. tests, has been produced in the plant of with a big passion. To increase efficiency of your cooler, before using it we strongly recommend you; to read the whole guide keep the guide as a source to use the cooler according to guide instructions.
- Page 4 Product display area For commercial types, energy consumption tests are done according to the standarts Technical features are specified on the labels.Ecocold Cooling A.S. reserves all the rights for changing technical features of the products , without any kind of declaration.
- Page 5 APPLE HEAD APPLE 188 APPLE 212 FG...
-
Page 6: Digital Thermostat
SLIDING LID SLIDING LID PROTECTIVE HANDLE BUMBERS DIGITAL THERMOSTAT COMPRESSOR AIR GLIDE... - Page 7 If the cable is damaged, the replacement must be done by authorized Ecocold service. While running, if you have a hesitation concerning electrical connection, call the nearest service. When unplugging, hold the knob of the socket, never hang from cable.
- Page 8 If possible, carry the cooler with a forklift or a hand lift If you have a no lift, carry the cooler with enough While carrying the cooler person in a stable position. always use gloves. While carrying the cooler, just handle from wooden pallet.
- Page 9 Remove the cabinet that is Remove the plastic clamps fixed to the pallet from the to release the cabinet from fixing areas with screwing the transport pallet. tools. Unfix the fixed screws and Cut off the protection move the cabinet on to the nylon on the cabinet by floor from the pallet with using a cutting tool.
- Page 10 Make a stable pushing.Between cooler and wall, there must be min 15 cm gap. After allocated the cooler, you should wait for 6 hours. Than you can plug it, the first run must be when the cooler is empty for 2 hours.
- Page 11 The protective film should be removed (if it exists) By using adjustable feet, make the cooler stable. Avoid gaps, prevent vibration. Compressor group air inlet must not be prevented. This is the most important issue. Allocate your product that it will be parallel to the ground, no aim is required.
- Page 12 Temperature of the cooler is calibrated for the most proper conditions. The operating temperature can be adjusted from the digital thermostat. We advice you to keep them with default factory value. Internal temperature of the cooler is -18/ -23 degrees, can be adjusted 01 –...
-
Page 13: Internal Cleaning
BEFORE CALLING SERVICE... FAILURE POSSIBLE SOLUTION THE COOLER CHECK THE PLUG AND FUSE. IS NOT THE PROBLE CAN BE AT ELECTRICAL CABLE OR PLUG.. WORKING THERE IS MAKE SURE THE SLIDING LIDS ARE FULL CLOSED. SNOWING OR MAKE SURE THAT THERE IS NO AIR IN THE FREEZER. SWEATING IN THE CABINET SWEATING AT THE... - Page 14 CONTACT Ekrem Elginkan Caddesi No 5 Manisa OSB 3. Kısım Yunusemre, Manisa - TURKEY +90 236 213 09 77 info@ecocold.com.tr...