Temperature Selection ....28 Table of Contents Spin Speed Selection..... 29 1 Safety Instructions......Drying Programmes....... 29 Intended Use........Washing and Drying Programmes 30 Safety of Children, Vulnerable 6.10 Programme and Consumption Persons and Pets ......Table ..........Electrical Safety......6.11 Auxiliary Function Selection..
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Children under the age of 3 Electrical Safety should be kept away unless • Product should be unplugged continuously supervised. during installation, mainten- • Electrical products are danger- ance, cleaning and repair pro- ous for children and pets. Chil- cedures.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical mains,...
Page 7
• Place the product on a level valve should be fitted. The and hard surface and balance maximum allowed temperat- with the adjustable legs. ure is 25°C. • Connect the product to a • Fit the end of the water dis- grounding plug protected by a charge hose to the dirty water fuse suitable to the current val-...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
• Take the following precautions in hot water by adding extra to prevent formation of biofilm detergent before being dried in and malodours: the washing machine with dryer. Otherwise, fire hazard – Make sure the room where arises. the washing machine is •...
Page 10
laundry remains at a temperat- in the machine. The colour left ure where it will not be dam- by the leather parts may smear aged. You may be exposed to on other textiles. hot steam if you open the • If there is a problem that you cover without completing the cannot solve using the inform- cooling step.
• Do not dry large laundry such • Prevent the lint from accumu- as tulle curtains, curtains, lating around the product. sheets/beddings, blankets, Maintenance and rugs in the machine. Laundry Cleaning Safety may get damaged. • Do not wash the product with •...
2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
3 Technical Specifications Supplier’s name or commercial brand Beko WT510 Model name 7178584900 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet...
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Cover B WARNING Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply.
5 Preliminary Preparation • Tough stains must be treated properly Please read the “Safety Instruc- before washing. If you are not sure, tions” section first check with a dry cleaner. 5.1 Sorting the Laundry • Wash trousers and delicate laundry turned inside out.
Drum Cleaning programme. If this pro- Follow the instructions in “Pro- gramme is not available in your product, ap- gramme and consumption table”. ply the method which is described in sec- When the appliances is overloaded tion "Cleaning the loading door and the product’s washing performance will drum".
Page 20
• Do not add washing chemicals (Liquid detergent, Softener, etc.) while the ma- chine is during Drying step. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry.
Page 21
• If the softener is not fluid, dilute with wa- • Put the tablet detergent in the main ter before placing in the softener com- washing compartment (compartment no. partment. “2”) or directly inside the drum before washing. WARNING • Tablet detergents may leave residue in Do not use liquid detergents or the detergent compartment.
• Oxygen-based decolourants can be used drawer and wait for the product to rinse together with detergents. However, if it away the detergent during water intake. does not have the same viscosity as the Add the decolourant to the same com- detergent, first place the detergent in partment while the machine continues compartment no.
tected by the machine. And if the detected programme duration increased automatic- load is higher than half load; washing pro- ally. You can follow this change on the dis- gramme will be adjusted accordingly and play. 6 Operating the Product Please read the “Safety Instruc- tions”...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Drying Level Indicator 12 Child Lock Enabled symbol...
6.4 Selection of Washing Program Symbols shown on the display are schematic and may not match with 1. Determine the programme suitable for the product one-to-one. the type, quantity and soiling level of the If you do not want to perform dry- laundry in accordance with "Programme ing process after the programme and consumption table".
Page 27
be washable at 40 °C or 60 °C in a single Do not load more than 1 double cycle and dries them so that they can be fibre duvet (200 x 200 cm). put in a cupboard immediately. Do not wash your duvets, pillows and etc.
• Xpress / Super Xpress If you want to use HomeWhiz fea- Use this programme to wash your lightly ture and Remote Control function, soiled or unspotted cotton clothes in a you must select Downloaded Pro- short time but not for towels or heavy cot- gramme.
6.7 Spin Speed Selection No change can be made in pro- grammes where spin speed adjust- ment is not allowed. You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.
When the drying programme is selected, the spin speed setting is in the range of Maximum spin speed. In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard.
• HygieneTherapy Hygienic Ventilation programme does not use water. Use this pro- Hygienic washing with hot air (pro- gramme for clothes you want to gramme duration 58 min.) clean by ventilation. The hygienic ventilation programme en- WARNING: Do not put chemicals sures that the temperature of the laundry is such as detergents, bleach, stain kept at relatively high temperatures with a...
Page 33
You can see the washing duration on the display of your machine while selecting a programme. De- pending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual dura- tion of the wash cycle.
Koch-/ Buntwäsch 1400 04:00 0,750 Koch-/ Buntwäsch 1400 04:00 2,000 Pflegeleicht 1200 02:35 1,100 Xpress / Super 1400 00:28 0,250 Xpress Eco 40-60 + 1400 09:10 5,100 Cupboard 1400 06:35 2,775 The consumption values given for programmes other than the Eco 40-60 programme for washing and drying online are only indicative.
If the selected wetness level (Iron • Remote Control Dry, Cupboard Dry, Cupboard Extra You can use this auxiliary function button Dry) cannot be reached at the end to connect your product to smart devices. of the drying programme, your ma- For detailed information, see HomeWhiz chine automatically extends the Feature and Remote Control Function.
Page 36
This is not a washing programme. • Child Lock This is a maintenance programme. Use Child Lock function to prevent children Do not turn this programme on from tampering with the machine. Thus you when there is something inside the can avoid any changes in a running pro- machine.
will flash while the product is pairing with Time Based Drying – minute smart device. If connection is successful, To achieve the desired dryness level at a icon will remain on. low temperature, you can choose from dry- To deactivate bluetooth connection: ing durations of 30, 90 and 150 minutes.
In order for the End Time function is activ- Additional laundry can be added ated and the programme is completed at into the machine during the End the end of the specified time, you must Time countdown. At the end of the press Start/Pause button after adjusting countdown, End Time indicator the time.
If the Remote Control Function is selected, the door will be locked. In order to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. 6.16 Changing the Selections After Opening the loading door in case of Programme has Started power failure:...
Switching the machine to pause mode: If you turn the programme selection Press the Start/Pause button to switch the knob when the Child Lock is en- machine to pause mode. Pause symbol will abled, the programme will not be flash on the display. cancelled.
6.20 HomeWhiz Feature and Remote In order to use the HomeWhiz func- Control Function tion, the application must be in- stalled on your smart appliance, HomeWhiz allows you to use your smart and your washing machine must be device to check your washing machine and paired with your smart appliance get information about its status.
Page 42
2. To start the setup, make sure that your Your washing machine will auto- machine is turned off. Press and hold matically turn off if you cannot real- the Temperature button and the Remote ize the setup successfully within 5 Control Function button simultaneously minutes.
6.20.3 Remote Control Function and Using It After HomeWhiz setup, bluetooth will auto- matically turn on. To activate or deactivate the Bluetooth connection, please see “Bluetooth 3”. If you turn off and on your machine while bluetooth is active, it will automatically re- HomeWhiz Application may require connect.
of your washing machine. Once access is Once you activate this function on the established to the product, you will see a washing machine, it will remain enabled screen similar to the one below. apart from certain conditions and allow you to control your washing machine remotely via bluetooth.
1. Press the marked part of the syphon We recommend you to wipe the door gas- within the softener compartment and ket with a dry and clean cloth at the end of then pull the drawer towards yourself to the programme. This will remove residues take it out.
7.5 Draining Remaining Water and 2. Open the filter cover. Cleaning the Pump Filter The filter system in your product prevents solid items such as buttons, coins and fab- ric fibres clogging the pump impeller during draining of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend.
Page 47
• Transportation safety bolts are not re- Programmes do not start after the load- moved. >>> Remove the transportation ing door is closed. safety bolts. • Start / Pause / Cancel button is not • Laundry quantity in the product is too pressed.
Page 48
• If there is no power, loading door of the • Timer may stop during spinning step. >>> product will not open. >>> To open the Automatic unbalanced load detection loading door, open the pump filter cap system is activated due to the unbal- and pull down the emergency handle po- anced distribution of the laundry in the sitioned at the rear side of the said cap.
Page 49
• Excessive amount of detergent is used. • A higher temperature was selected. >>> >>> Use the recommended amount of de- Select the proper programme and tem- tergent appropriate for water hardness perature according to the type and soiling and the laundry. degree of the laundry.
Page 50
softener step. Wash and clean the drawer • Excessive amount of detergent is used. with hot water. Put the detergent in the >>> Use only sufficient amount of deter- correct compartment. gent. • Detergent was mixed with the softener. • Detergent was stored under improper >>>...
Laundry comes off wet after the drying Loading door cannot be opened. step. • The door of your machine might not be opening due to safety reasons. >>> If the • The programme selected might not be suitable for the type of laundry. >>> door locked indicator is still active on the display after the drying step, the machine Check the care labels on clothes and se-...
Page 52
cording to the methods described in legis- product and subsequently cause fire, flood, lative acts pursuant to Directive 2009/125/ electrocution and serious personal injury to occur. By way of example, but not limited to, the However, only the service agent (i.e. au- following repairs must be addressed to au- thorized professional repairers) that you thorized professional repairers or re-...
Need help?
Do you have a question about the WT510 and is the answer not in the manual?
Questions and answers