Advertisement
Quick Links
Pellet Pro® "Double D" Double Door Vertical
1.
Remove all the outer protective cardboard and plastic.
2.
Remove all parts from the inside of the smoker and remov e all cellophane. Wipe off any manufacturing oil from the
heat diffuser and drip pans.
3.
Move the cabinet off the pallet and onto a flat surface.
4.
Insert the hopper assembly to the side of the cabinet and connect the (4) corresponding color-coded Molex connectors.
Then, connect the ground wire to the bottom of the cabinet. See pictures below.
Smoker Installation Manual
*It is recommended to use
gloves during the installation
due to possible sharp edges.*
Advertisement
Summary of Contents for PELLET PRO Double D
- Page 1 Pellet Pro® “Double D” Double Door Vertical Smoker Installation Manual *It is recommended to use gloves during the installation due to possible sharp edges.* Remove all the outer protective cardboard and plastic. Remove all parts from the inside of the smoker and remov e all cellophane. Wipe off any manufacturing oil from the heat diffuser and drip pans.
- Page 2 5. Using the (4) Large M6 Bolts and Washers provided, secure the hopper assembly to the cabinet from the inside of the cabinet. (This is easiest with two people.) 6. Locate the PID Controller Housing and remove the mounting piece by loosening the large set screw.
-
Page 3: Circulation Fan
11. Secure the gauges to the front doors finger tight. 12. Insert the Heavy D Stick Burning Heat Diffuser and drip pans as shown in the picture below. Circulation Fan When mounting the circulation fan, remove the fan housing and attach the fan to the top of the cabinet using the four screws provided. - Page 4 The “Heavy D” Pellet Grill Stick Burning Heat Diffuser (Patent Pending) 1. Fill either one or both sides of the Heavy D with a large wood stick or a few large wood chunks. The recommended size stick is 3” x 3” x 7-1/2”. If using smaller wood chunks, it is also recommended to add lava rock to the ends which prevents the wood from catching fire.