Page 1
Anti-Sulfurated High Power Chip Resistors (Wide Terminal Type) ERJ C type ERJ C1 series Features ● High resistance to sulfurization achieved by adopting Anti-Sulfurated electrode material (Ag-Pd-based inner electrode) and structure (Covered electrode) ● High solder-joint reliability by wide terminal construction ●...
Page 2
Anti-Sulfurated High Power Chip Resistors (Wide Terminal Type) Ratings Power derating curve -55 ℃ 70 ℃ For resistors operated in ambient temperatures above 70 ℃, power rating shall be derated in accordance with the figure on the right. 155 ℃ 80 100 Ambient temperature (℃) Construction...
Page 3
Anti-Sulfurated High Power Chip Resistors (Wide Terminal Type) Performance Performance Test Item Test conditions requirements ⊿R Within specified Resistance 20 ℃ tolerance Within specified T. C. R. +25 ℃ / +125 ℃ T. C. R. Overload ±2 % Rated voltage × 2.0, 5 s Resistance to ±1 % 270 ℃, 10 s...
Page 4
■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been granted.
Page 5
Matters to Be Observed When Using This Product Matters to Be Observed When Using This Product (Fixed resistor) Use environments and cleaning conditions ■ This product (fixed resistor) is not designed for use in specific environments. Using the resistor in the following specific environments or service conditions may affect the performance/reliability of the resistor.
Page 6
Matters to Be Observed When Using This Product Reliability and product life A capacitor conforming to "AEC-Q200" refers to a capacitor having passed some or all of evaluation test items defined in AEC-Q200. To know the detailed specifications of each capacitor or specific evaluation test scores, please contact us. We issue a delivery specification sheet for each product ordered.
Page 7
Matters to Be Observed When Using This Product / Reference Information ■ Soldering the resistor with too much solder or too little solder results in the poor reliability of the solder connection of the resistor. Use the proper volume of solder in the soldering process. Sufficiently check for the volume of solder used. ■...
Need help?
Do you have a question about the ERJ C1 Series and is the answer not in the manual?
Questions and answers