MONDOLUX Hartley HE Installation Manual

Hartley HE
SPOTLIGHT

Warnings

 The safety and compliance of this fitting are not assured unless the following instructions are adhered to. Please retain these instructions for
future reference.
 Always turn the mains OFF prior to installation. See Picture below.
 The system is IEC 60570:2003+AMD1:2017 certified and Installation must be carried out by a licensed electrician
 Risk of Electric Shock: Prior to installation or maintenance, disconnect the fitting from power supply and other control wiring. Faulty cables and
wiring need to be replaced by manufacturer only.
 Risk of Burns: When in use, the fitting's surface may reach high temperatures and can cause skin burns. It is recommended to install the fitting
out of reach to avoid any physical contact.
 It is recommended to always wear safety glasses and gloves during installation.
 For safety reasons please keep children away from installation site.
 Please follow below instructions for disposal in accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment):
• Fittings cannot be disposed alongside other household waste.
• Remove the lamp/ battery for decommissioning (if applicable)
• Send them to nearest WEEE collection center.
 For further inquiries, please contact Mondolux at https://www.mondolux.com.au/
Product code
MS41
Installation Manual
mondolux.com.au