Icom A16 Quick Operation Manual

to the headset for monitoring, and a headset
adapter is required.
• SETTING THE SIDE TONE LEVEL
Push [PTT] to turn the transmit mode "ON".
During transmit, push [Y] or [Z] to adjust
the level.
– "ST-0" is OFF / "ST-10" is the maximum level.
HEADSET CONNECTION
• Connect headset through
the optional OPC-2401
headset adapter.

• TURNING ON BLUETOOTH
®
Push , then hold down [ENT
second to enter Set mode.
If not displayed, push [MR ] until
MW
"BT SET" appears.
Select "BT SET", then push [ENT
Select "ON", then push [ENT SET].
• PAIRING TO A BLUETOOTH
®
Push , hold down [ENT
SET
to enter Set mode.
Push [MR ] and scroll to "PAIRING", then
MW
push [ENT ].
SET
Select "BT SET" and then "Pairing".
The radio searches for a headset.
Push [CLR] to cancel searching.
.
"SUCCESS" and " " is displayed if the
headset or device is correctly connected.
Push [CLR
Headset
(User supplied)
FREQUENCIES / CHANNELS
OPC-2401
] for 1
SET
].
SET
DEVICE–A16B
] for 1 second
©2023 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. 43373
] twice to exit the Set mode.
HOME
NOTES
OPERATION GUIDE
EMERGENCY
Push found at the bottom right of the
0
keypad), then [ 121.5] (found next to the
key). Use the PTT to call on the emergency
frequency.
GENERAL
If the button marking on the keypad is in white,
push to activate. For secondary functions push
, then the desired orange-marked key.
KNOB
(1)
Rotate to turn the radio power on or
off and to adjust the audio level.
SIDE KEYS
(2 & 3)
(2) PTT SWITCH
2
(3) SET SQUELCH
[ ] [ ]
Push SQL or SQL to
Z Z
(3)
3
the point where noise is just
muted. Push [CLR] to return to
frequency mode.
QUICK
A16
1