Setting The Time And Date; Setting The Beeper, Clock, And Fraction Mark Coe - HP 48G Series Quick Start Manual

Setting the Time and Date
1. Open the TIME application,
3% SET TIME AMD DATE 3:
ne: JB:45:57 AM
DATE: 1+ 3/94 M~DoY
choose
ENTER HOUR
IER(STISITTWT
. Type the hour, minutes, and seconds, pressing after
each.
(optional) If you want the clock to report the time using 24-hour
format, press until Z4-F 1s displayed.
Press (») to advance the highlight and then type the day, month,
and year, pressing after each.
(optional) If you want the clock to report the date using
day- month- year format, press CA) (+/=) until +. F.% is displayed.
Press [ik | once everything | 1 s set as you wish.
Setting the Beeper, Clock, and Fraction Mark
1. Open the MODES utility:
1-4
SESE CALCULATOR MODES $8
NUMEER FORMAT: EAs]
AMGLE MEASURE: Degrees
COORD :YSTEM: Rectangular
¥ EEEP _CLOCKE _FM.
CHOOSE WUMEEFR DIZPLAY FORMAT
[CcHODZ] [FLAG] ETT
@(ones)
. (optional) If you want to turn the © beeper off , move the cursor
to the BEEFERfield, and press so that the check-mark
disappears.
. (optional) If you want to continuously display the date and time
on the main calculator screen, move the cursor to the {LCE
field and press «CHEso that the check-mark appears.
: (optional) If you 'want to use the comma instead of a decimal
press «iHE so that the check-mark appears.
. Once you have set the options as you wish, press
Start Here