Table of Contents
Advertisement
-e1-
24 | Baste Operations
Playing a tape repeatedly (AUTO
REPEAT)
z
'You can play the recorded portion ofa tape repeatedly.
1 Press MENU.
'The main menu appears.
2. Using the +0 or~¢ buttons, move the cursor (>) to "VCR MODE," then
3. Using the + 0 or butions, move the cursor (P) to "AUTO REPEAT,"
then press OK.
4 Using the + 0.0r- © buttons, select ON.
5 Press PLAYS.
Playback begins. When the tape reaches its end, it will automatically
'rewind and begin playing again.
Replaying a scene automatically
'You can use the REPLAY key on your remote control to automatically
replay scenes.
'Press REPLAY.
"The tape will rewind for ten seconds of viewing time and then begin
playing automatically.
| you wish to replay more than ten seconds, prese REPLAY repeatedly.
'Each time you press the button, it will add ten seconds onto the playing
time, up toa total of 40 seconds.
Setting the colour system
'Normally, you will want to leave the colour system on AUTO. However, if
'you notice streaks appearing on the screen during playback, you may
'want to set the colour system to the system that the tape was recorded in.
4 Press MENU.
'The main menu appears.
2 Using the + 0 or-© buttons, move the cursor (>) to "VCR MODE," then
3 Using the + 0 or-9 buttons, move the cursor (>) to "COL SYS," then
press OK
(4. Press the + 0.0r—0 buttons until the corresponding colour system appears
(PAL or NTSC), then press OK.
55 Press MENU to return to the original screen.
Displaying the on-screen
indications
Prees @ to display the following on-ecreen information. To show only the
'amount of tape remaining and linear tape counter on the screen, prese @
again.
'To make the indications disappeex, press €® until no indications appear.
'Account
of tape reastcing
eptoning ofthe tape
'Current
date ond tine nea tape counter
asic Operations 25
Advertisement
Table of Contents
