Page 1
Bluetooth Speaker BTL-01 1. Brief introduction This system is a music player office chair with wireless Bluetooth connectivity function. 1. WithBluetooth music module, in order to connect smoothly within maximum 10 meters straight line. 2. 2000mAHlithium-ion batteryinside,whenitisfullycharged,itcanplaymusicfor 10 hours. 3. Stereo 5W X 2 channel amplifier high-fidelity audio output.
Page 2
4. Instructions Step1: Connect the charger and plug in the USB cable. The green indicator will light on the audio switch. The charging power source has been turned on and is charging at this time. * This project version of the sample indicator is only used as a power-on prompt, and it won’t turn off after the charge is completed.
Page 3
Step 3: turn on your phone's Bluetooth. Step 4: Turn on Bluetooth Settings - Open Detection - Search Devices. Find the following device name "LFmusicchair" and connect. After connected, you will hear "du du du" . Step 5: After the connection is successful, please open music player software and play the music, then, enjoy music.
Page 4
5. The Main Parameters: Operating current: ≤30mA stand-by current : ≤1mA Temperature Range: -20oC to +70oC Wirelesstransmissionrange:10meters Sensitivity: -80dBm<+/-0.1%BER Frequency range: 2.4GHz-2.480GHz Audio Performance : Support AAC, MP3, SBC, Stereo Audio signal to noise ratio: ≥75dB Distortion: ≤0.1%...
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.