ROBOOTER E40 Instruction Manual
  1. Manuals
  2. Brands
  3. ROBOOTER Manuals
  4. Scooter
  5. E40
  6. Instruction manual

ROBOOTER E40 Instruction Manual

Hide thumbs Also See for E40:
Table of Contents

Advertisement

Quick Links

BBR-QP-BOX-01, Rev.VE1.0
ROBOOTER E40
instruction manual
Shanghai Bangbang Robotics Co., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E40 and is the answer not in the manual?

Questions and answers

Marina Crane
April 13, 2025

To push wheelchair

0

Related Manuals for ROBOOTER E40

Summary of Contents for ROBOOTER E40

  • Page 1 BBR-QP-BOX-01, Rev.VE1.0 ROBOOTER E40 instruction manual Shanghai Bangbang Robotics Co., LTD.
  • Page 2 Dear users: Thank you for choosing the electric wheelchair of Shanghai Bangbang Robotics Co., LTD. Robooter E40 Product Manual is an important document that provides the product information, operation methods and after-sales service information of the electric wheelchair. Before use, please carefully read Robooter E40 Product Manual for correct operation and maintenance.
  • Page 3 CONTENTS INCLUDE 2.Product introduction 1.Safety precautions 3.Part introduction 4.Use of the of the electric wheelchair electric wheelchair 5.Maintenance and 6.APP operation guide troubleshooting of the electric wheelchair 7.Disclaimer 8.Packing list...

  • Page 4: Safety Precautions

    1.Safety precautions 1.1 Symbol description Warning The text contents with this symbol mean that, in case of being ignored, there may be serious injury. Notes The text contents with this symbol mean that, in case of being ignored, there may be slight or moderate damage or material damage. 1.2 Applicable range of this product helping disabled, elderly and frial people who have difficulty walking to move.

  • Page 5: Disposal Considerations

    1.Safety precautions This test ensures that the users or escorts of the electric wheelchair have enough time to move the electric wheelchair from the rain to a safe place; Do not operate the electric wheelchair in thunderstorms; Do not place this electric wheelchair under a rainstorm; Do not place this electric wheelchair in a wet place for a long time;...
  • Page 6 1.Safety precautions 1.7 Precautions during use (1) Driving on slopes This electric wheelchair has passed the test requirements of climbing on a slope of not exceeding 9° with a load of 150kg. Do not try to climb the slopes exceeding 9°. During reversing on a slope, please be sure to slow down the electric wheelchair.
  • Page 7 1.Safety precautions 1.8 Specific warnings (please read carefully) 1.8 Specific warning (please read carefully) Do not perform snake driving, high-speed sharp turn and other dangerous driving operations, otherwise it may lead to the electric wheelchair tilt and human injury; Do not use the electric wheelchair on escalators, which may increase the risk of being injured;...
  • Page 8 1.Safety precautions before the braking function takes effect. Please take care of safety; Before use of the electric wheelchair, please check the connection of all electrical parts for safety and reliability; Do not disconnect, snip or modify the wiring harness parts which have been installed on the electric wheelchair under any condition.
  • Page 9 1.Safety precautions 1.9 Excerpts from EMC-related guidelines and statements in manufacturer's accompanying documents EMI Compliance Table(Table 1) Electromagnetic environment Phenomenon Compliance Home healthcare environment RF emissions CISPR 11 Group 1,Class B Harmonic distortion IEC61000-3-2 Class A Home healthcare environment Voltage fluctuations and flicker IEC61000-3-3 Compliance Home healthcare environment Table 1-Emission...
  • Page 10 1.Safety precautions Test Band Immunity test levels Frequency (MHz) Home healthcare environment (MHz) 380-390 Pulse modulation 18Hz， 27V/m 430-470 FM,±5kHz deviation 18Hz sine,28V/m 704-787 Pulse modulation 217 Hz sine, 28V/m 800-960 Pulse modulation 18Hz sine, 28V/m 1720 1700-1990 Pulse modulation 217Hz sine, 28V/m 1845 1970 5785...
  • Page 11 1.Safety precautions Phenomenon Basic EMCstandard Immunity test levels Home healthcare environment Conducted disturbances IEC61000-4-6 3V.0.15MHz-80MHz6V in ISM bands induced by RF fields and amateur radiobands between 0.15MHz and 80MHz 80%AM at 1kHz Table 5 ‒ Signal input/output parts port Number Cable classification Cable Max.

  • Page 12: Product Introduction

    2.Product introduction 2.1 Product features and functions The DC brushless deceleration motor is the core part to drive the electric wheelchair. The special upper controller is used to achieve the control of the motor. Through the independent rocker operation, it can achieve forwarding, differen- tial turn, low speed reversing and other actions;...
  • Page 13 2.Product introduction 2.2 Main structure of the product Figure 2.2.1 930mm 930mm 624mm 1000mm 450mm 700mm Figure 2.2.2...

  • Page 14: Technical Specifications

    2.Product introduction 2.3 Technical Specifications Product model BBR- E40-01 the type class of the wheelchair: Class A, Class B or Class C Class A Folding mode Manual folding 8km/h Maximum speed Maximum barrier height 40mm Maximum crossing ditch width 10cm...

  • Page 15: Storage Conditions

    2.Product introduction 2.4 Storage conditions The packaging storage temperature is -20℃～60℃; The relative humidity is no more than 95%; The atmospheric pressure shall be 56～110kPa; The electric wheelchair shall be stored in the ventilated room without the harmful gas which may cause corrosion, and it is not allowed to press and pile up; Under packed status, the maximum piling height is 5 layers.
  • Page 16 3.Part introduction of the electric wheelchair Handrail Upper controller Backpack Headlamp Backrest component Seat component Folded switch Battery box Brake Pedal plate Anti-rollover wheel Omni-directional wheel Storage basket Driving motor wheel Figure 3.1...
  • Page 17 4.Use of the electric wheelchair 4.1 Notice for use Please carefully read the Product Manual before use and check whether the parts are in good condition to ensure your safety; When the electric wheelchair is operated for the first time, level and hard ground shall be selected as soon as possible to ensure that your sounding area has no barrier or pedestrian;...
  • Page 18 4.Use of the electric wheelchair When using an electric wheelchair, avoid being close to a radio transmitter, high-power handheld radio transmitter or receiver; Any error or improvement in the Product Manual will be specified in the new specification. We may launch new products to meet the market needs at any time. If there is any difference between the relevant functional description and performance and this manual, the specific products and relevant supplementary instructions shall prevail, and it will not be stated in this manual;...
  • Page 19 4.Use of the electric wheelchair 4.2 Expanding and folding of the electric wheelchair 4.2.1 Expanding and folding operation mode Figure 4.2.1.1 Expanding operation mode: When manually expanding the electric wheelchair, please press the folding switch with one hand (position 1 in Figure 4.2.1.1) and pull the armrest up with the other hand (position 2 in Figure 4.2.1.1) until the electric wheelchair is fully expanded;...
  • Page 20 4.Use of the electric wheelchair 4.2.2 Anti-clamp pinch point Figure 4.2.2 Note: During the folding/expanding steps, Do not contact the position indicated in the anti-clamp manual;...
  • Page 21 4.Use of the electric wheelchair 4.3 Upper controller 4.3.1 Introduction to the upper controller Power switch key （ Lock/Unlock） Gear ︿ button SOS key Gear ﹀ button Horn key Fn Key Display Direction rocker Figure 4.3.1...
  • Page 22 4.Use of the electric wheelchair 4.3.2 Function description of the upper controller Power switch key （ Lock/Unlock） Gear ︿ button SOS key Gear ﹀ button Horn key Fn Key Figure 4.3.2 ( 1 ) Direction rocker Pushing the upper controller rocker can control the speed and direction of the electric wheelchair;...
  • Page 23 4.Use of the electric wheelchair 4.3.3 Display screen menu description Battery percentage display Battery power display Cruise control display Speed display Bluetooth status display Gear display Figure 4.3.3.1 ( 1 ) Battery percentage display (as shown in Figure 4.3.3.1) The upper controller screen of electric wheelchair displays the battery in %; ( 2 ) Speed display (as shown in Figure 4.3.3.1) The upper controller screen displays the electric wheelchair driving speed (unit: km/h);...
  • Page 24 4.Use of the electric wheelchair "︿" and "﹀" can be used to adjust the gears during the cruise control process; Dial the rocker to control the bending during the cruise control process; After entering the cruise control mode, if the cruise control mode is not started within 5s, the cruise control mode will be automatically exited, and the voice prompt "With wait timeout, the cruise control mode has been automatically exited"...
  • Page 25 Figure 4.3.3.3 (8) Fault code display (as shown in Figure 4.3.3.3) For the diagnostic code displayed by the built-in information diagnostor of the product, refer to 5.2 troubleshooting for the content. Figure 4.3.3.4 (9) SOS display (as shown in Figure 4.3.3.4) Long press SOS button for 3 seconds to start SOS call.
  • Page 26 4.Use of the electric wheelchair Figure 4.3.3.5 (10) Pushing mode display (as shown in Figure 4.3.3.5) At the same time, press and hold the button "Speed ︿" and "Speed ﹀" for 3s, and the pushing mode icon will be displayed on the upper controller screen of electric wheelchair.
  • Page 27 4.Use of the electric wheelchair 4.4 Usage of armrest touch light and USB charging port Figure 4.4.1 Touch the touch switch of the lower armrest lamp on the left upper control to control the light on and off of the armrest touch lamp. (As shown on Figure 4.4.1) Figure 4.4.2 The armrest touch lamp assembly provides two USB charging ports(USB Type-A、...
  • Page 28 4.Use of the electric wheelchair 4.5 Left and right handrails 4.5.1 Interchangeable operation mode of left and right armrest controllers Figure 4.5.1 Step 1,please turn off the machine power before exchanging the left and right armrest controllers. Step 2,use a hex wrench to remove the three Allen screws under the armrest control- ler and open the connecting harness of the left and right controllers.
  • Page 29 4.Use of the electric wheelchair 4.5.2 Gear adjustment operation mode of left and right armrest controller Figure 4.5.2 Step 1, please turn off the machine power before adjusting the gear of the left and right armrest controllers. Step 2, use a hex wrench to remove the three Allen screws under the armrest control- ler, and the controller moves outward by one gear.

  • Page 30: Battery Disassembly

    4.Use of the electric wheelchair 4.6 Battery 4.6.1 Battery disassembly The vertical state of the knob is unlocked Figure 4.6.1.1 ( 1 )In Step 1, manually rotate the left knob of the battery case and rotate the left knob to the unlocking position. Then open the battery left buckle. (As shown on Figure 4.6.1.1) Figure 4.6.1.2 ( 2 )In Step 2, manually rotate the right knob of the battery case and rotate the right...

  • Page 31: Battery Installation

    4.Use of the electric wheelchair Figure 4.6.1.3 ( 3 )In Step 3, remove the battery in the direction shown in the figure. (As shown on Figure 4.6.1.3) 4.6.2 Battery Installation Figure 4.6.2.1 （1） In Step 1, place the battery in the cell slot in the direction shown. (As shown on Figure 4.6.2.1)
  • Page 32 4.Use of the electric wheelchair The horizontal state of the knob is locked Figure 4.6.2.2 （2） In Step 2, manually close the battery right buckle and rotate the right knob of the battery box with the right knob to the locked position. (As shown on Figure 4.6.2.2) Figure 4.6.2.3 （3）...
  • Page 33 4.Use of the electric wheelchair 4.7 Switch to pushing mode press at the same time Figure 4.7 Press '︿' key and '﹀' key at the same time to enter pushing mode. Shake the rocker can exit the pushing mode;( As shown on Figure 4.7)
  • Page 34 4.Use of the electric wheelchair 4.8 Electric wheelchair charging mode Figure 4.8.1 Figure 4.8.2 Charging method I: Connect the Charging method II: Take out the charger and plug the charger plug battery, plug the charger plug into into the upper controller for the charging port of the battery to charging;( As shown on Figure 4.8.1) charge;( As shown on Figure 4.8.2)
  • Page 35 5. Maintenance and troubleshoot list of the electric wheelchair 5.1 Daily spot inspection and maintenance The electric wheelchair user or operator is responsible for the cleaning, inspection and maintenance; General maintenance of the electric wheelchair includes: Clean electric wheelchairs, check tires, check batteries; Our suggestion: The electric wheelchair shall be checked every 6 months;...
  • Page 36 5. Maintenance and troubleshoot list of the electric wheelchair 5.2 Performance fault table of the electric wheelchair Fault code Anomaly status Fault phenomenon Key abnormality The key corresponding function does not work. The rocker ground line is disconnected The rocker function does not work. The rocker power cord is disconnected The rocker function does not work.
  • Page 37 5. Maintenance and troubleshoot list of the electric wheelchair 5.3 Instruction of safety warning Voice prompts Corresponding scene description. Enter novice mode Press the novice mode button. Quit the novice mode Press the novice mode button again. Alart Long press SOS key to trigger SOS. It is in default that after the product is locked after it is powered on.
  • Page 38 5. Maintenance and troubleshoot list of the electric wheelchair 5.4 Production date and service life The service life of this product is 5 years after the product is delivered. Please use within the effective date. In case of expiration, Do not use the product to avoid occurrence of accident.

  • Page 39: Install App

    6. APP operation guide of the electric wheelchair Scan the QR code to download APP Install APP Banghui Android Bangbang walking ios (Android) The above screen is displayed after scanning, click to install the mobile application.
  • Page 40 6. APP operation guide of the electric wheelchair The above screen indicates that the installation of the mobile application is complete. Click on the above screen to open the mobile application...
  • Page 41 6. APP operation guide of the electric wheelchair 6. APP operation guide of the electric wheelchair (IOS) The above screen is displayed after scanning, click to install the mobile application. The above screen indicates that the mobile application is being installed...

  • Page 42: Connect Device

    6. APP operation guide of the electric wheelchair The above screen indicates that the installation of the mobile application is complete. Click on the above screen to open the mobile application Connect Device Click on the above screen to search device.
  • Page 43 6. APP operation guide of the electric wheelchair Note： Obtain phone permissions Click on the above screen to turn on your mobile’ s Bluetooth Install APP Note： Obtain phone permissions Click on the above screen to turn on your phone's location.
  • Page 44 6. APP operation guide of the electric wheelchair Note： Obtain phone permissions Click "Location access" on the above screen to turn on your phone's location. Once the above operation has been done mobile application start searching for the device. Click to pair the mobile application and device.
  • Page 45 6. APP operation guide of the electric wheelchair Note:When the wheelchair is in lock mode, display this interface. After turning on the wheelchair, enter the lock mode automatically. Only use the app after unlocking on the wheelchair. The above screen indicates a successful connection. Click in the above screen to access status screen of the electric wheelchair...
  • Page 46 6. APP operation guide of the electric wheelchair Click in status screen to access enhanced mode adjustment and general mode adjustment.( General mode speed:4.5km/h, enhanced mode speed:6km/h)
  • Page 47 6. APP operation guide of the electric wheelchair Click in the status screen to access the remote cotrol mode Circle up to move forward, down to move back, left to turn left, right to turn right. Click in the top right corner to access the setting screen...
  • Page 48 6. APP operation guide of the electric wheelchair Click “General Settings” in the setting screen to access the general settings mode. Cruise control system: slide left to turn off cruise control, slide right to turn on cruise control. Click” Vocice settings” in the General settings to access the vocice settings mode. Turn on voice prompts: slide left to turn off...
  • Page 49 6. APP operation guide of the electric wheelchair Click “Battery information” in the setting screen to access battery information screen. Shows battery power percentage and battery status. Click “Current Version” in the setting screen to access version upgrade mode. Show current device version. Click to upgrade version of device.
  • Page 50 During use, it is not allowed to violate the prohibited items indicated in the Product Manual. If the users or the third parties fail to operate strictly in accordance with the Robooter E40 Product Manual or operate by violating the prohibited items indicated in Robooter E40 Product Manual, resulting in personal injuries or property damages, the corresponding legal responsibilities shall be undertaken by specific executors.

  • Page 51: Packing List

    8. Packing list Material name Unit Quantity Remarks Electric wheelchair Included battery Product Manual Number Charger Including hexagon wrench, Toolkit open wrench, screw Clean towel Table 9...
  • Page 52 Shanghai BangBang Robotics Co., Ltd. ADD:Room 501, Building 3, No. 188 Zhongchen Road, Songjiang District, Shanghai Tel: 00862137777720 Email: info@bangbangrobotics.com Website: www.bangbangrobotic.com Kingsmead Service B.V ADD: Zonnehof 36,2632 BE, Nootdorp, Netherland Revision date： 20230315 TEL:0031(0)64657 1005 file No.: BBR-QP-BOX-01, Rev.VE1.0...

Table of Contents

Save PDF