GMC Sierra Denali 1500 2023 Owner's Manual page 398

1. Spare Tire (Valve Stem Pointed Down)
2. Tire/Wheel Retainer
3. Hoist Cable
4. Hoist Assembly
5. Hoist Shaft
6. Jack Handle Extensions
7. Wheel Wrench
8. Hoist Shaft Access Hole Cover
9. Hoist Shaft Access Hole
10. Hoist End of Extension Tool
11. Spare Tire Cable (If Equipped)
1. If equipped with a spare tire cable,
reinstall the cable to the spare wheel by
looping the cable around a wheel vent
window then pass the clip end of the
Vehicle Care
cable through the looped end. The excess
cable wire should be on the valve stem
side of the spare tire.
2. Put the tire on the ground at the rear of
the vehicle with the valve stem pointed
down, and to the rear.
3. Pull the cable and spring through the
center of the wheel. Tilt the wheel
retainer plate down and through the
center wheel.
Make sure the retainer is fully seated
across the underside of the wheel.
4. Attach the wheel wrench (7) and
extensions (6) together, as shown.
397