- Grass trimmer (when fitted with nylon line cutting head) The grass trimmer is intended for trimming grass. Do not use it for other purposes. TECHNICAL DATA MODEL GBC 52 GBC 43 Centrifugal Clutch; flexible shaft Remote type Maximum speed of linker shaft 8000/10000...
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. - Sound power level LwA Brush cutter: Brush cutter: 110 107.94dB(A) dB(A) Grass trimmer: Grass trimmer: 112 108.24dB(A) dB(A) - Uncertainty K 3 dB(A) Guaranteed Sound power values [dB(A)] 115dB(A) 120dB(A) (in accordance with 2000/14/EC) Line Max.
Page 5
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. Wear foot protection Wear glove to protect your hands Beware of foot injury by cutting attachment Beware of thrown objects hit by cutting attachment. Never use without properly mounted guard. Beware of blade thrust ...
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. WARNING DANGER The engine exhaust forms this product contains chemicals to cause cancer, birth defects, of other reproductive harm. Specifications, descriptions and illustrative material in this manual are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.
Page 7
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. guard. Serious injury to the operator or bystanders could result as well as damage to the machine. Inspect the area to be cut and remove all debris that could become entangled in the ...
Page 8
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. In start-up or during operation of the engine, never touch hot parts such as the muffler, the high voltage wire or the spark plug. After the engine has stopped, the muffler is still hot. Never place the machine in any ...
Page 9
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. minimize the reactions. When transport, this unit must be handled carefully. Do not expose yourself or others to danger. ● Envelop the blade before storage. Keep children away from it. ● Never remove the machine’s guard. ●...
Page 10
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. OPERATION OF QUICK RELEASE MECHANISM Pull the strip to release the machine from you in the case of emergency.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. DESCRIPTION SAFETY MANUAL included with unit. Read before operating and keep for future reference to learn proper, safe operating techniques. 1. BLADE 3-tooth blade for grass, weed or brush cutting applications. Harness and metal shield are required for blade operation. 2.
Page 12
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. 8. THROTTLE TRIGGER Spring loaded to return to idle when released. When accelerating, press trigger gradually for best operating technique. Do not hold trigger while starting. 9. HANDLE this handle can be adjusted at you convenience for comfort. 10.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. ASSEMBLY INSTRUCTIONS INSTALLING THE LOWER SHAFT Pack the aluminum tube into the connector inside, make the convex ball aim at the hole on connector Then turning the knob clockwise until it is tight INSTALLING HANDLE Install handle in bracket.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. INSTALLING BLADE Secure metal blade between upper and lower plate with nut. WARNING CAUTION EXCESSIVE VIBRATION. STOP ENGINE IMMEDIATELY Excessive vibration of blade means that it is not properly installed-stop engine immediately and check blade.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. RULES FOR SAFE OPERATION WARNING DANGER All model’s trimmers and brush cutters can throw small stone, metal or small objects as well as the material being cut. Read these “Rules for Safe Operation” with care. Follow the instructions in your operator’s manual.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. CUTTING WITH A NYLON HEAD WARNIN DANCER The proper debris shield must be in place on the unit when nylon cutting line is used, The cutting line can flap around if too much line is exposed. Always use the plastic debris shield with cut-off knife when using nylon cutting heads.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. CUTTING WITH A NYLON HEAD TRIMMING: This is feeding the trimmer carefully into the material you wish to cut. Tilt the head slowly to direct debris away from you. If cutting up to a barrier such as fence, wall or tree, approach from an angle where any debris ricocheting off the barrier will fly away from you, Move the line head...
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. CUTTING WITH A BLADE 3-tooth metal blade is provided with the machine The metal blade is used for cutting brush and weeds up to 3/4” in diameter. Use of saw blade with this machine is prohibited. WARNING DANGER WARNING...
Page 19
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. being thrown away from you. That is using the side of the blade that it is rotating away from you. Tilt down the blade slightly on this same side. You will be hit by some debris if you scythe in both directions.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. FUEL & OIL MIXTURE Never fill the fuel tank to the very top. Never add fuel to the tank in a closed non-ventilated area. Do not add fuel to this unit close to an open fire or sparks. ...
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. PREPARING FOR OPERATIONS WHEN MIXING GASOLINE WITH TWO CYCLE ENGINE OIL, USE ONLY GASOLINE WHICH CONTAINS NO ETHANOL OR METHANOL (TYPES OF ALCOHOL). THIS WILL HELP TO A VOID POSSIBLE DAMAGE TO ENGINE FUEL LINES AND OTHER ENGINE PARTS.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. OPERATIONS ENGINE STARTING AND STOPPING PROCEDURES STARTING COLD ENGINE Move the stop switch to “START” position. 1. Give a gentle push on the primer pump repeatedly (7-10times) until fuel comes into the primer pump. 2.
Page 23
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. OPERATIONS IMPORTANT! Place the unit on a flat, firm place. Keep the cutting head clear of everything around it. The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle trigger into the start position.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. MAINTENANCE & CARE AIR FILTER Accumulated dust in the air filter will reduce engine efficiency. Increase fuel consumption and allow abrasive particles to pass into the engine. Remove the air filter as often as necessary to maintain in a clean condition.
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. TROUBLE SHOOTING Clean or replace the plug if fouled with heavy oily deposits. Replace the plug if the center electrode is worn rounded at the end. Spark gap 0.6-0.7mm (.023".028") ...
Page 26
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. TROUBLESHOOTING GUIDE 1. FAILURE TO START symptom probable cause remedy fuel these is no fuel in tank Add fuel in tank system fuel filter obstruct Clean fuel filter abnormality spark plug instead fuel spark fuel is too dirty fuel...
Page 27
Acquaer Ltd. www.gamagarden.eu H-4900, Fehérgyarmat Szatmári út 11. TROUBLESHOOTING GUIDE 2. LOW OUTPUT symptom probable cause remedy clean fuel filter 、 clean fuel flameout when speedup fuel filter obstruct, fall short of fuel road、 the smoke is thin, muffler fouled with oily adjust carburetor...
Page 28
-Observance of the prescribed maintenance intervals -No unauthorised alteration of the design. -Installation of original GAMA GARDEN replacement parts/accessories. -Presentation of the completed guarantee card and/or proof of purchase. This guarantee does not extend to normal wear-and-tear on blades, blade mounting components or friction disks, V-belt/toothed belts, running wheels/tyres air filters spark plugs and spark plug connectors.
Need help?
Do you have a question about the GBC 43 and is the answer not in the manual?
Questions and answers