Electrolux EWF9025DQWB User Manual page 11

Table of Contents

Advertisement

Available languages

Available languages

Vapour
Touchpad
Select this option to add approximately
30 minutes of tumbling in vapour during
the wash cycle. Vapour helps open fabric
fibers up to allow laundry additives to
release tough stains. The indicator of this
option will be on.
NOTE:
Vapour may not necessarily be visible
inside the drum during a vapour wash
cycle. Vapour is created below the
drum and allowed to naturally rise into
the clothes.
Vapour may not be present during the
entire vapour wash cycle.
Vapour function is more effective with
half load.
At the end of the Vapour cycle, the
clothes will be warmer, softer and
detached from the drum.
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may
notice vapour exiting from the drain
hose of the washing machine, this
is normal and there is no cause for
alarm.
Quick
With this option you can decrease the
program duration. Use this option for
items with light soil or items to refresh.
This option will reduce the working
time and the number of rinses.
If you need to add more rinse
phases, press "Spin" + "Option" at
the same time to add "Extra Rinse
" option.
Soak
This option allows you to soak heavily
soiled clothes and stained items at the
beginning of the wash before main
washing phase.
This option will increase the duration of the
program selected for about 50 minutes.
And uses more water from normal wash.
The process is as follows.
1.
fill water and turn the washing
drum (this takes about 20 minutes)
After press Start/Pause touchpad, the
machine will start add water to the
washing drum, which will start to rotate
slowly to dissolve detergent and evenly
distribute cloths.
2.
soak (this takes about 30 minutes.)
The machine will enter
the process of soaking,
The washing drum will
stop and rotate once in
a while in order to
redistribute cloths.
3.
Once the soak process complete, the
machine will check the water level
again and will start the selected
program and continue by using the
same soak water.
NOTE
If you Do not wish to use the soak water to
wash cloth, please follow the steps below:
Press Start/Pause to pause the
1.
washing machine. Then press On/Off to
turn off the machine.
Press On/Off again to start the
2.
machine, add detergent, and select the
program of your choice. Press
Start/Pause again to start the selected
program.
ENGLISH
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewf1025dqwb

Table of Contents