Section 11 - Installation; Introduction; Unpacking; Inspection For In-Shipment Damage - Beehive International B150 Series Operator's Manual

SECTION II
INSTALLATION
2.1 INTRODUCTION
This section contains information on unpacking,
receiving inspection, connection of the communi-
cations interface, physical placement of the termi-
nal, and preliminary functional control settings.
This allows the user to tailor the 8150 series for
specific requirements.
2.2 UNPACKING
The following items are furnished with each 8150
series terminal:
a. The display terminal with keyboard
b. Operator's Manual
There are no tie-downs or packing materials inside
the unit which need to be removed. Store the car-
ton for use as a future shipping container, if desired.
2.3
INSPECTION FOR IN-SHIPMENT
D~GE
Upon receipt, carefully check components for any
signs of shipping damage. All shipping containers
have been specially designed to protect their con-
tents, and special care has been taken to prevent
damage under normal shipping conditions. Mis-
handling will be evident upon inspection of the ship-
ping container, and if damage is found after visual
inspection, take care not to destroy the evidence.
If necessary, document the damage with photographs
and contact the transport carrier as soon as possible.
2-1
2.4 THE BEELINE
In a continuing effort to provide the best in support
and service to terminal users, a one-year subscription
to an updating information service is available. Ser-
vice tips, manual changes, corrective modifications
and documentation, and recommended spare parts
are only a few of the items this service provides.
Please refer to the order form at the end of this
manual for further information.
2.5
ACCESSORIES
The following accessories are available for use
with the 8150 series terminal:
a.
b.
2.6
Acoustic Coupler Cable (Part # 112-0031)
NOVA* Computer Serial 1/0 Cable
(Part #112-0040)
IDENTIFICATION
An identification plate located on the bottom cover
of the terminal provides the model number, serial
number, weight, voltage, current requirements, fre-
quency, and power classifications.
2.7 INSTALLATION
2. 7 .1 Placement for Operation
The terminal is fully self-contained, and its porta-
bility allows it to be moved and relocated to alter-
*Trademark of Data General Corporation.