Table of Contents
Advertisement
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the appliance
does not touch the wall or
other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the appliance is
installed on a plinth or a
tumble dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
5.3 Fixing plate kit
If you install the appliance on a plinth
that is not an accessory supplied by
AEG, secure the appliance with the fixing
plates. This spare part is available in web
shop or from authorised dealer.
Read carefully the instructions supplied
with the accessory.
5.4 The water inlet hose (Ultra
Anti-flood)
Before connecting up the machine to
new pipework or to pipework that has not
been used for some time, run off a
reasonable amount of water to flush out
any debris that may have collected in the
x4
pipes.
To protect drinking water enclosed
non-return valve must be installed
between the water tap and the water
supply hose.
Connect the water inlet hose to the cold
water tap with 3/4" thread.
ENGLISH
11
Advertisement
Table of Contents
