Project Nursery Dreamweaver Quick Start Manual

What's in the box?
(1) Dreamweaver Sound Soother
(1) Charging Cable
Getting started
1. CHARGE THE DREAMWEAVER
Before you start using the Dreamweaver for the first time,
it's a good idea to charge it completely.
To charge the Dreamweaver:
Open the DC IN flap on the
back of the Dreamweaver.
Plug the included charging
cable into the jack behind this
flap. Plug the other end into a
power source, like a computer
or a USB charging adapter. The
indicator above this jack turns
Flap open
red to show the Dreamweaver
is charging.
2. TURN ON THE DREAMWEAVER
Back of the Dreamweaver
Press and hold the button on
the back of the Dreamweaver.
Everyday use
Back of the
Dreamweaver
PLAYING SOUNDS
The Project Nursery Dreamweaver offers a variety of
soothing lullabies and nature sounds, as well as white noise,
to calm baby.
To cycle through these sounds:
Press the button on the
back of the Dreamweaver.
Each press goes to a different
selection.
To adjust the volume: Press the
– or + button.
To turn sounds off: Press and
hold the button on the back
of the Dreamweaver. (If lights
are on, they remain on.)
Back of the Dreamweaver