Advertisement
2.1
Notes
2.1.1
DVD-Module
For repair of the DVD-module SD3, the service manual 3122
785 11010 has to be used.
2.1.2
ComPair
For assistance with the repair process of the monoboard an
electronic Fault finding guidance has been developed , this
program is called ComPair.
This ComPair program is available on CDROM.
The Version of the CDROM for repair of the monoboard is
V1.3 or higher and can be ordered with codenumber : 4822
727 21637.
This is an update CDROM , so when the COMPAIR CDROM
is used for the first time , one has to install the ComPair
ENGINE CDROM V1.2 first.
The V1.2 CDROM can be ordered with codenumber 4822
727 634 and has to registered after installation , the
procedure for registration is explained in the help file of the
program and in the booklet from the CDROM.
The cable to connect the monoboard with a PC can be
ordered with codenumber 3122 785 90017.
All the hardware and software requirements of the systems
necessary for working with ComPair is described on the
CDROM.
Warnings And Laser Safety Instructions
DVD733K /691/781
2.
GB 5
Advertisement
