Advertisement
Important Information
Please read these instructions carefully before using the Easi-Torches and retain
for future reference.
Easi-Torch contains a non-replaceable, rechargeable battery.
n
Do not attempt to remove the battery.
n
Do not allow your Easi-Torch to come into contact with water or other
n
liquids.
In the event of static your Easi-Torch may malfunction. In this case, please
n
switch it off and then back on again to reset it.
Charging Your Easi-Torch
Before using your Easi-Torch for the first time, the torch will require charging.
Place all the torches onto the docking station, plug the power adaptor into the
docking station, and a green LED will light on the docking station to show that
the docking station is powered, and a red LED will light on each of the torches
indicating that they are charging. After approximately four hours the amber LED
on the torch will light indicating that the Easi-Torch is fully charged and ready for
use.
Using Your Easi-Torch
A fully charged Easi-Torch will last for approximately two hours continuous use.
The battery life indicator (above the on/off switch indicates the remaining battery
life (100%, 75%, 50%, 25%). When less than 10% of the battery life remains, the
red LED will begin to flash. When this occurs the torch should be turned off and
returned to the docking station to recharge. Note the torch must be turned OFF or
it will not recharge.
Easi-Torch Charger
The Easi-Torch is supplied with a charging adaptor. The adaptor is supplied with
a UK plug only.
All manuals and user guides at all-guidesbox.com
The safety isolating transformer to be used with the Docking Station should be
regularly examined for potential hazards such as damage to the cable, cord,
plug, enclosure or other parts. In the event of any damage, the Docking Station
must not be used until the damage has been properly repaired.
The Docking Station is not intended for children under 3 years old.
n
The transformer is not a toy.
n
The Docking Station must only be used with the recommended transformer.
n
Toys liable to be cleaned with liquids are to be disconnected from the
n
transformer before cleaning.
Specifications
Specification
Working
Charge
Charge current
Temperature range
Battery life
Recharge time
Troubleshooting
Easi-Torch is designed to work reliably and predictably in all normal conditions.
However, it is possible that problems may occur. Please check the following
before contacting technical support:
Problem
Red LED flashes
Easi-Torch does not charge
Easi-Torch
Voltage 2.4V dc
Voltage 5V dc
100mA
-20 to 80ºC
2 hours continuous use (approx)
4 hours (approx)
Solution
Battery is very low. Recharge the Easi-Torch
The Easi-Torch must be switched off
prior to placing on charge
Advertisement
