Advertisement
Notes
¢ Do not use this unit in combination with cordless
headphones or another unit of the same type.
Signal cancellation will result.
Trouble
Cause and/or remedy
ee
No picture and no sound at all
¢ The AC power adaptor is not
connected to an AC outlet.
* Connect the AC power adaptor to
an AC outlet.
The power of the receiver is turned
off (OFF).
* Press the power button to turn the
receiver (ON).
* The camcorder's transmitter and
receiver are not facing each other.
* Adjust the position and angle and
unclear picture of both units.
Another infrared emitting appliance
is operating.
* Stop operating it.
On safety
Operation
On cleaning and care
Clean the cabinet with a soft cloth slightly
moistened with water or mild detergent solution.
If your TV has a 21-pin connector
(EUROCONNECTOR), use the 21-pin connector
supplied with the camcorder.
Specifications
Receiver
VIDEO output
Phono jack (1)
1 Vp-p, 75 ohms unbalanced,
sync negative
(when POWER is ON)
DC input
DC 6V
Operating temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
—4°F to 140°F (-20°C to 60°C)
AC power adaptor
Input
AC 120 V 60 Hz
Output
DC 6 V 400 mA
For models purchased in other European
countries
Input
AC 220-230 V 50 Hz
Output
DC 6V 400m
Advertisement
