Using The Remote Control Transmitter; Spiral Play - Technics SL-PD988 Operating Instructions Manual

12
Delete play (continued)
Using the remote control
transmitter
for SL-PD988
for SL-PD888
RECALL
To confirm the selections to be deleted
RECALL Press RECALL.
Each time you press RECALL, the display
shows the selected disc and track number in
the sequence you have entered.
-Dn FT
nn 7
<-> <>) ™
i -i pa.
Track to be deleted Order you have
entered
To clear a selection to be deleted
Each time you press CLEAR, you will cancet
last entry in the order you have entered.
To clear a selection in the middie of the se-
quence, press RECALL repeatedly until the
display shows the selection to be cleared, and
then press CLEAR within three seconds after
the last press.
| Spiral play = |
The changer plays the first tracks on all the loaded discs in se-
quence, followed by the second tracks on all the discs, and so on.
(Reter to the illustration below.)
SPIRAL
C=)
Spiral play will begin with the first track on the
disc situated at the playing position.
7 € j>P > ł
Illuminates
The changer will stop automatically when all the tracks on all
discs have been played once.
For your reference:
When a disc with fewer tracks finishes playing, that disc will be
skipped and the changer will continue playing the remaining
track on the other discs in spiral sequence.
To cancel spiral play mode
SPIRAL Press SPIRAL again.
The "SPIRAL" indicator will go out.
The changer will return to sequential play
mode from the current track on the current
disc which is playing.