Page 1
HOMEDEPOT.COM THANK YOU We appreciate the trust and con dence you have placed in Glacier Bay through the purchase of this tub and shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Pre-Installation PLANNING INSTALLATION Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product. TOOLS REQUIRED Safety Adjustable Phillips...
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Shower ange Shower arm Shower head Valve body Flange Handle Index Plug Tub spout...
Installation Installing the supply Preparing for installation connections CAUTION: Always turn off the water supply before NOTE: Be sure to position the body (D) correctly in the removing an existing faucet or replacing any part of a wall, with the markings "UP" facing upward. Hot water faucet.
Page 6
Installation (continued) Installing the tub and shower Flushing the water outlets and outlet connections checking for leaks □ For tub and shower combinations, turn on the NOTE: Do not use PEX or CPVC between the valve and hot and cold water supply lines, allowing water spout.
Page 7
Installation (continued) Installing the shower flange, Installing the tub spout shower arm, and shower head □ Insert the long end of the shower arm (B) □ Wrap thread sealant tape around the pipe through the ange (A), then wrap thread sealant threads of the tub spout outlet (1, not included) tape around the long end of the shower arm (B) in a clockwise direction, as shown.
Installation (continued) Installing the handle NOTE: Before proceeding, ensure the valves are closed. □ Position the anges (E) on the valves (D). □ Attach the handles (F) to the stems (1), and secure them with the screws (AA). Use a Phillips screwdriver to tighten the screws (AA).
Service Parts *Specify Finish Part Description Part Number Part Description Part Number Flange Shower ange RP38046* RP80387* RP70154 Shower arm RP38019* Washer RP64031 Connector RP70426 Cartridge RP22010 Shower head RP38137* Seat & Spring RP22008 Index (H) RP10028 Diverter RP70160 Index (C) RP10029 Screw RP50059...
Page 10
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-GLACIER HOMEDEPOT.COM Retain this manual for future use.
Page 11
HOMEDEPOT.COM GRACIAS Apreciamos la con anza que has depositado en Glacier Bay al comprar este grifo para bañera y ducha. Nos esforzamos por crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet para ver nuestra línea...
GARANTÍA LIMITADA DE POR VIDA Los productos de Glacier Bay están fabricados con normas y mano de obra de calidad superior y están respaldados por nuestra garantía de por vida limitada. Glacier Bay garantiza al comprador consumidor original que sus productos no presentan defectos materiales o de fabricación.
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de comenzar la instalación de este producto, asegúrate de que no falta ninguna pieza. Compara las piezas con la lista de contenido del paquete y herrajes incluidos. Si falta alguna pieza o está dañada, no intentes instalar el producto.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Brida de la ducha Brazo de la ducha Cabezal de la ducha Cuerpo de la válvula Brida Llave Índice Tapón Caño de la bañera...
Instalación Cómo instalar las conexiones Cómo prepararse para de suministro la instalación PRECAUCIÓN: Cierra siempre el suministro de agua NOTA: Asegúrate de colocar el cuerpo (D) en la posición antes de quitar un grifo existente o reemplazar cualquier correcta en la pared, con la marca "UP" hacia arriba. Las pieza de un grifo.
Page 16
Instalación (continuación) Cómo instalar las conexiones Cómo purgar las salidas de salida de la bañera y la de agua y chequear que no ducha haya fugas □ Para combinaciones de bañera y ducha, abre las líneas de suministro de agua fría y caliente, y NOTA: No usar PEX o CPVC entre la válvula y el caño.
Page 17
Instalación (continuación) Cómo instalar la brida de la Cómo instalar el caño de la ducha, el brazo de la ducha bañera y el cabezal de la ducha □ Coloca cinta selladora para roscas alrededor de las roscas de la tubería del caño de la bañera □...
Instalación (continuación) Cómo instalar la llave NOTA: Antes de continuar, asegúrate de que las válvulas estén cerradas. □ Coloca la brida (E) en la válvula (D). □ Conecta las llaves (F) a los vástagos (1) y asegúralas con los tornillos (AA). Usa un destornillador Phillips para apretar los tornillos (AA).
Piezas de repuesto *Especi car acabado Pieza Descripción Número de pieza Pieza Descripción Número de pieza Brida Brida de la ducha RP38046* RP80387* Tuerca RP70154 Brazo de la ducha RP38019* Arandela RP64031 Conector RP70426 Cartucho RP22010 Cabezal de la ducha RP38137* Base y resorte Índice (H)
Page 20
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama a servicio al cliente de Glacier Bay de lunes a viernes de 8 a.m. a 6 p.m., hora estándar del este 1-855-HD-GLACIER HOMEDEPOT.COM Conserva este manual para uso futuro.
Need help?
Do you have a question about the 833W-0001 and is the answer not in the manual?
Questions and answers