MADRAX GRIDRAC GR114 Assembly Instructions

GRIDRAC GR114-116
ASSEMBLY INSTRUCTIONS
Fig. 1
Step 2
Step 3
Check parts list to ensure that you have received all the parts.
Step 1. Insert Bolt upward through hole nearest the curved portion of Leg and
Pole. Fasten loosely with Lock Nut. Repeat by attaching other Leg to Pole.
Step 2. Insert Bolt through hole at the top of the Leg and end of Grid. NOTE: Grid
must be positioned such that the holes align with Leg holes. See Figure 2.
Fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 3. Align bottom holes of Grid with last hole of Legs. Insert Bolt upward and
fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 4. Complete assembly by tightening all fasteners.
CONFIDENTIAL DRAWING AND INFORMATION IS NOT TO BE COPIED OR DISCLOSED
TO OTHERS WITHOUT THE CONSENT OF GRABER MANUFACTURING, INC.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
©2013 GRABER MANUFACTURING, INC. ALL PROPRIETARY RIGHTS RESERVED.
GR114 4 Bike Single Sided
Grid
Step 2
Pole
Step 1
Step 3
GR116 9 Bike Single Sided
Plastic Shipping Caps
Leg
Lock Nut
Bolt
Legs
Grid
Poles
3/8"-16x3 1/2" Hex Bolt
3/8"-16 Lock Nuts
GRABER MANUFACTURING, INC.
P(800) 448-7931, P(608) 849-1080, F(608) 849-1081
WWW.MADRAX.COM, E-MAIL: SALES@MADRAX.COM
Fig. 2
Step 2
Step 2
Parts List
Part Quantity
MADRAX DIVISION
1080 UNIEK DRIVE
WAUNAKEE, WI 53597
2
1
1
6
6
MADE IN U.S.A.
PRINTED IN U.S.A.
PINK, 7-24-13, SMC