Advertisement
Quick Links
INSTRUCTION
MANUAL
2 MINUTE TIMER
3 SETTINGS HANDLE
UV TOOTHBRUSH
SANITIZING BASE
READ AND SAVE ALL INSTRUCTIONS
BEFORE USING THIS DEVICE TO
ENSURE SAFETY AND EFFECTIVENESS
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, especially when children are present, basic safety
precautions should always be used, including the following:
WARNING
- To reduce the risk of fire, electric shock, or injury:
1.
Do not leave plugged in device unattended for a long period of time. Unplug from outlet when not in use and before cleaning.
2.
Do not allow device to be used as a toy. Close attention is necessary when used by or near children.
3.
Use this device only as described in this manual.
4.
Use only approved replacement brush heads designed to work with this handle and base.
5.
Turn off the device before unplugging.
6.
Do not use with damaged cord or plug. If device is not working properly, refer to the LIMITED WARRANTY section on the last page
of this instruction manual for further information.
7.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
8.
Do not unplug by pulling on cord. Grasp and pull the plug not the cord.
9.
Keep cord away from heated surfaces.
10. Never handle plug or Charging Base with wet hands.
11. This device has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt
to tamper with this safety feature.
12. Do not use when feeling drowsy or sleepy.
13. Do not use this product outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
14. Never block the air openings of this device. When plugged in, device must always be placed on a firm counter or table with room around
it for proper air circulation. Never place on a soft surface, such as a bed or couch, or where towels or cloths can restrict air circulation.
15. Keep the air openings free of lint and the like.
16. Never drop or insert any object into any opening.
17. DO NOT fill this device with water or submerge in water or other liquid.
Danger
–
This section applies to Charging Base only
1.
Always unplug the device after sanitizing brush heads, after charging handle or if it will be left unattended for a long period of time.
2.
Do not use while bathing.
3.
Do not place or store device where it can fall or be pulled into a tub or sink.
4.
NEVER reach for any electrical device that has fallen into water. Unplug immediately.
Risk of exposure to excessive ultraviolet (UV) radiation - To avoid exposure, do not operate if the lid of the UV Base is not completely
closed and in the correct position or if lamp is damaged. The lid of the base is equipped with an interlocking system to reduce the
risk of excessive ultraviolet radiation - DO NOT attempt to defeat its purpose. Replacement of the Lamp is intended for qualified
personnel only. Do not attempt to service yourself. Service personnel: There is risk of exposure to ultraviolet radiation.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY
S
A
S
A
S
A
Do not place in or drop into water or other liquid.
V
E
T
H
E
S
V
E
T
H
E
S
V
E
T
H
E
S
–
To reduce the risk of electrocution:
E
I
N
S
T
R
E
I
N
S
T
R
E
I
N
S
T
R
Model: 421B
U
C
T
I
O
N
S
U
C
T
I
O
N
S
U
C
T
I
O
N
S
Advertisement
Summary of Contents for 180 INNOVATIONS 421B
- Page 1 INSTRUCTION MANUAL 2 MINUTE TIMER 3 SETTINGS HANDLE Model: 421B UV TOOTHBRUSH SANITIZING BASE READ AND SAVE ALL INSTRUCTIONS BEFORE USING THIS DEVICE TO ENSURE SAFETY AND EFFECTIVENESS IMPORTANT SAFETY INSTRUCTIONS When using electrical products, especially when children are present, basic safety...
- Page 2 LIST OF MAIN PARTS Brush Head Power Handle UV Storage Compartment Lid UV Charging Base / Storage Compartment (holds 2 brush heads) LED Charging Indicator Light LED Mode Indicator Lights H - High; M - Medium; L - Low Power Button - ON / OFF / MODE selection Power Cord location UV Lamp Indicator TECHNICAL SPECIFICATIONS...
- Page 3 OPERATION AND USE continued Mode Selection Press Power Button 1 time …………High Speed (H)…………… H LED lights up. Press Power Button 2 times………. Medium Speed (M)………. M LED lights up. Press Power Button 3 times………. Lower Speed (L)…………. L LED lights up. Press Power Button 4 times……….
- Page 4 6. This warranty does not cover damage resulting from any attempts to repair or modify the device and it’s parts. 7. It is at the full discretion of 180 INNOVATIONS to determine if any visible or notable attempts have been made to repair, modify, alter or disassemble any part of the device, therefore voiding the warranty.