Roast; Reheat; Dehydrate; Bake - Ninja Foodi AF300 Instructions Manual

COOKING IN YOUR AIR FRYER – CONT .

Roast

1 Install crisper plate in the drawer
(optional), then place ingredients in the
drawer and insert drawer in unit.
2 The unit will default to zone 1 (to
use zone 2 instead, select zone 2).
Select ROAST.
3 Use the TEMP arrows to set the
desired temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour
and in 5-minute increments from 1 to
4 hours. Press the START/STOP button
to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.
11 ninjakitchen.eu

Reheat

1 Install crisper plate in the drawer (optional),
then place ingredients in the drawer, and
insert drawer in unit.
2 The unit will default to zone 1 (to
use zone 2 instead, select zone 2).
Select REHEAT.
3 Use the TEMP arrows to set the
desired temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/STOP button to
begin reheating.
5 When reheating is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by tipping
them out or using silicone-tipped
tongs/utensils.

Dehydrate

1 Place a single layer of ingredients in the
drawer. Then install the crisper plate in
the drawer on top of the ingredients and
place another layer of ingredients on the
crisper plate.
2 The unit will default to zone 1 (to use
zone 2 instead, select zone 2). Select
DEHYDRATE. The default temperature
will appear on the display. Use the TEMP
arrows to set the desired temperature.
3 Use the TIME arrows to set the time
in 15-minute increments from 1 to 12
hours. Press the START/STOP button
to begin dehydrating.
4 When cooking is complete, the unit will
beep and "End" will appear on the display.
5 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.

Bake

1 Install crisper plate in the drawer
(optional), then place ingredients in the
drawer and insert drawer in unit.
2 The unit will default to zone 1 (to
use zone 2 instead, select zone 2).
Select BAKE.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 10°C.
3 Use the TEMP arrows to set the
desired temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/STOP button to
begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.
ninjakitchen.eu 12