Panasonic TH-42PZ85U Operating Instructions Manual page 23

• PC menu setting (change as desired)
® Making settings ÷ "How to Use Menu Functions" @ to 0 (P. 24)
Menu Item i Adj ustments/Config urations (options)
Reset Resets PC adjust
@ H & V: The H and V sync signals are input from the HDIVD connector. (p. 49)
Sync @ On G: Uses a synchronized signal on the Video G signal, which is input from the G
connector. (p. 49)
Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
blurred.
Adjusts the horizontal position.
H-position
V-position
Clock phase
input
resolution
PC
adjust
H-frequency
V-frequency
Adjusts the vertical position.
I
I
I
O_
i
ol
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
@ Input signal switched from VGA to WVGA
@ input signal switched from XGA to WXGA
Displays the H (Horizontal)/V (Vertical) frequencies.
@ Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
@Audio menu (p. 24)
@ For PC input, only audio signals can be output from PROG OUT terminals.
@
E3
--=
o0
i
93
tt_
33
C)
03
C)
O
.-t
<
23