T-Motor AM-Link Instructions

Telemetry cards instruction

Front side：
Three Digital Tube
Reverse side：
Telemetry signal line at
the receiver end
Throttle signal line at the
receiver end

Optional Instruction:

Long press the KEY button to switch options, short press to adjust the parameters, stay on the third optio
n and long press to save the settings after the setting is completed.
Option
1 Motor number of poles
2 Telemetry ID
3 Receiver type

Precautions

1. Before using this ESC, please carefully check all power equipment and aircraft instructions to ensure the power
Option
Parameter
Power up default is 28,optional number of poles 4~30
Power up default is 1,optional ID number range 0~27
01 stands for FrSky receiver,02 stands for Futaba Receiver,03 stands for Jeti
receiver
Parameter key
Telemetry signal line at
the ESC end
Throttle signal line at the
ESC end
Parameter