Audio Adjust - Panasonic TC-26LX20 Operating Instructions Manual

Menu Operations
AUDIO ADJUST
1
Press to select AUDIO ADJUST,
Press to display the AUDIO ADJUST
screen.
AUDIO ADJUST
2
Press to select the sub-menu.
Select the setting listening the sound.
Press to activate the setting if necessary
NORMAL / NORi'_AMZE
SNect "NORMALIZE"and press "OK"to return eachMODE to the factory defaultsetting.
Notes:
o 'NORMAL" means the MODE is in the factory default setting, 'NORMAL"
changes to "NORMALIZE" when you change the setting of BASS.
TREBLE. BALANCE, SURROUND, EQUALIZER or AUDIO LEVELER.
oYou can normalize each MODE separately. AUDIO LEVELER
MODE
AUTO
STANDARD
I DYNAMIC
Automatically adiusts for a wide Dynamic Range
Emits the original sound
Gives contrast to sound
BASS, TREBLE, BALANCE, SURROUND,
EQUALIZER
You can change the level of each sub-menu (BASS,
TREBLE, BALANCE. SURROUND. EQUALIZER) for
each MODE (AUTO, STANDARD and DYNAMIC)
according to your personal preference
BASS Adjusts low frequencies.
TREBLE Adjusts high frequencies.
BALANCE Adjusts left and right volume
SURROUND To enjoy a concert hall effect,
select ON when stereo is playing
EQUALIZER Makes voice sound clear.
Normally set to ON.
STEREO / SAP / MONO
o Red display : With signal
White display : No signal
White display (All modes) : MONO
o[b change the mode using SAP button (see page 13),
STEREO Two channel Audio reception.
Second Audio Programming
SAP ( typically used for bilingual audio )
MONO Use when stereo signal is weak
HDMI IN
When using HDMI connection (see page 11), this feature will let you switch between Analog Input and Digital Input.
t UTO Automatically selects Analog / Digital signal.
DIGITAL Digital Input only.
ANALOG Analog Input only
AUDIO LEVELER
You can adjust the volume level for each of the input mode (TV, VIDEO1, VIDEO2, COMPONENT1,
COMPONENT2 and HDMI)
32