Installing/Removing
Installing/Removing the Blade Head
Removing the blade head: As shown in the figure, use your thumb to
●
hold the blade head and push up from under the blade head to lift it up
and away from the handle.
Installing the blade head: Align the clip (A) of the blade head to the slot
●
(B) of the body, and then press down the blade head. You will hear a
clicking sound when it's in position.
Note:
All blade heads can be removed and installed in the same way.
Installing/Removing the Beard Comb
Installing the beard comb: Insert the beard comb into the comb slot.
●
You will hear a clicking sound when it's in position.
Remove the beard comb: Pinch both sides of beard comb and pull it
●
vertically upwards.
Removing the
blade head
Installing the
blade head