Table of Contents
Advertisement
e To stop playback, press STOP O. The setis then
switched off.
MAINTENANCE
Cassette decks
To ensure a good recording and playback quality,
clean the parts (AX&XCXD) indicated in fig. 5 after every
50 hours of operation or, on average, once a month.
e Open the cassette holder by pressing EJECT O.
e Use a cotton bud slightly moistened with alcohol
or a special head cleaning fluid.
e Press PLAY < and clean the rubber pressure roller
© (fig. 5).
e Then press PAUSE (0 and clean the capstan ©),
recording/playback head (e) and erase head (a).
e After cleaning, press STOP O.
Cleaning of the heads (a) and (B) can also be done
by playing the cleaning cassette SBC 114 through
once as an ordinary cassette.
Notes
— The recorder-mechanisms
are fitted with self-lu-
bricating bearings and therefore must not be oiled or
greased.
— Do not expose the set, batieries and cassettes to
rain, moisture, sand, or to excessive heat from e.g.
heating equipment or in motor cars parked in the sun.
— Fingerprints, dust and dirt on the apparatus can be
removed
using a soft and clean, slightly damp
leather cloth. Do not use any cleaning agents which
contain abrasives or solvents such as benzine
thinner, alcohol, refined petrol or ammonia, since
they may affect and harm the cabinet.
This product complies with the radio interference
requirements of the European Community.
Advertisement
Table of Contents
