Concept Pro VCP7236-AHD User Manual

Concept Pro VCP7236-AHD User Manual

Ahd body camera

Advertisement

CAUTION
1. This installation should be completed by qualified service personnel and
should abide by all local codes and laws.
2. Do not disassemble the camera - this is to prevent electronic shock
and/or malfunction. Do not loosen any screws on the camera body.
3. Do not touch the front glass directly. If necessary, use a soft cloth to wipe off
dust or debris.
4. Avoid installation on surfaces subjected to frequent vibration or shocks.
5. Do not operate the camera beyond its temperature range or power source
ratings.
6. Should any damage or suspected damage occur, shutdown the power
source, unplug and contact your service provider.
7. Do not install the camera under unstable lighting conditions. Severe
lighting change or flicker can cause the camera to work improperly.
8. Never use the camera near a gas or oil leak.
9. Do not drop the camera or subject the unit to physical shocks.
10. Never keep the camera facing directly to strong light.
11. Do not install near devices which emit a strong electro-magnetic field.
12. Unplug the camera from the power source before maintenance.
13. Use a soft cloth only for cleaning.
14. If the camera may be exposed to weather conditions, dust particles or
moisture install in an IP rated housing suitable to the conditions.
PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY
INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.
SENSOR
1/3 INCH SONY CMOS
SENSOR RESOLUTION
2MP
SIGNAL SYSTEM
PAL
SCANNING SYSTEM
PROGRESSIVE
SYNC. MODE
INTERNAL
FRAME RATE
25fps
VIDEO FORMATS
AHD/TVI/CVI/CVBS
EFFECTIVE RESOLUTION
1920(H)x1080(V)
MIN. ILLUMINATION (LED OFF)
0.001Lux @ (F1.2,AGC ON)
MIN. ILLUMINATION (LED ON)
n/a
LENS
MANUAL 2.8-12mm VARIFOCAL
DAY & NIGHT
TRUE COLOUR/MONO ICR
DIGITAL WDR
OFF/ON(Level 0-8)/Auto
S/N RATIO
≥50dB
ELECTRONIC SHUTTER
1/50-1/50,000s
WHITE BALANCE
ATW/AWC-SET/Indoor/Outdoor/MANUAL
GAIN
LEVEL 0-15
AE MODES
BLC/HLC/OFF
DIGITAL NOISE REDUCTION
2D/3D
PRIVACY MASKING
YES
MOTION DETECTION
YES
VIDEO OUTPUT
1.0Vpp, 75 Ω BNC
TRANSMISSION RANGE
>300m via 75 Ω coaxial cable
SUPPLY VOLTAGE
12VDC±10%
POWER CONSUMPTION (MAX)
4.5W
OPERATING TEMPERATURE
-10℃~+55℃
OPERATING HUMIDITY
0% - 85% RH
64mm x 65mm x 150mm
WEIGHT
300g
CERTIFICATIONS
CE / FCC
Design and specification are subject to change without notice.
OSD
OSD Controller
UP - CVBS
POWER LED
P.I
LEFT - AHD
DC
VD
MENU / ENTER
DOWN - CVI
VIDEO OUT
RIGHT - TVI
VIDEO OUT JACK
DC12V/AC24V
F.G
POWER
MAIN MENU
AE
WB
DAY-NIGHT
VIDEO SETTING
LANGUAGE:
ENGLISH, CHINESE, SPANISH, KOREAN, ITALIAN
RESET
SAVE-EXIT
EXIT
EXPOSURE
BRIGHTNESS:
1-20
EXPOSURE MODE:
GLOBE, CENTER, BLC, FLC
LV (EXPOSURE
0-8
MODE = BLC):
GAIN:
1-8
RETURN
WB
MODE:
ATW, MWB
RGAIN
1-16
(MODE = MWB):
BGAIN
1-16
(MODE = MWB):
RETURN
DAY / NIGHT
MODE:
EXT, AUTO, COLOR, B/W
RETURN
VIDEO SETTING
CONTRAST:
1-50
SHARPNESS:
1-20
COLOR GAIN:
1-20
DNR:
1-15
IMAGE SIZE:
1080P, 720P
FORMAT:
PAL, NTSC
RETURN
2DNR
VCP7236-AHD
AHD Body Camera
USER MANUAL
D-WDR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VCP7236-AHD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Concept Pro VCP7236-AHD

  • Page 1 RIGHT - TVI 4. Avoid installation on surfaces subjected to frequent vibration or shocks. EXPOSURE MIN. ILLUMINATION (LED OFF) 0.001Lux @ (F1.2,AGC ON) VCP7236-AHD VIDEO OUT JACK BRIGHTNESS: 1-20 MIN. ILLUMINATION (LED ON) 5. Do not operate the camera beyond its temperature range or power source...
  • Page 2 IMPORTANT: ENSURE ALL CAUTIONARY PROCEDURES ARE 64mm OBSERVED DURING INSTALLATION. It is recommended the VCP7236-AHD is tested during the most demanding environmental conditions such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. Remove the camera unit carefully from the box, reserving the accessory contents in a safe place.

Table of Contents