Table of Contents
Advertisement
Getting started
Nano-SIM card and eSIM
Insert the SIM or USIM card provided by your carrier.
To have two phone numbers or carriers for a single device, activate the eSIM. Differing
from a physical nano-SIM card, an eSIM is an embedded digital SIM. Using both the
nano-SIM card and the eSIM may result in slower data transfer speeds in some areas.
eSIM may not be available depending on the region, carrier, or model.
•
Some services that require a network connection may not be available
•
depending on the carrier.
Inserting the SIM or USIM card
1
1
Insert the ejection pin into the hole on the tray to loosen the tray.
2
Pull out the tray gently from the tray slot.
3
Place the SIM or USIM card on the tray with the gold-colored contacts facing
downwards and gently press the SIM or USIM card into the tray to secure it.
4
Insert the tray back into the tray slot.
Use only a nano-SIM card.
•
Use caution not to lose or let others use the SIM or USIM card. Samsung is not
•
responsible for any damages or inconveniences caused by lost or stolen cards.
Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device
•
may be damaged.
If the card is not fixed firmly into the tray, the SIM card may leave or fall out of
•
the tray.
If you insert the tray into your device while the tray is wet, your device may be
•
damaged. Always make sure the tray is dry.
Fully insert the tray into the tray slot to prevent liquid from entering your device.
•
2
17
3
4
Advertisement
Table of Contents
