Bosch Professional GSR 12 V Original Instructions Manual page 13

OBJ_BUCH-208-005.book Page 13 Wednesday, April 20, 2011 11:56 AM
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving
application according to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Drill spindle thread
Weight according to EPTA-Procedure
01/2003
Technical data determined with 2,0 Ah NiCd battery.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Bosch Power Tools
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selector
4 Screwdriver bit*
5 Battery unlocking button
6 Battery*
7 Rotational direction switch
8 On/Off switch
9 Handle (insulated gripping surface)
10 Universal bit holder*
11 Securing screw for keyless chuck
12 Allen Key**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
GSR ... 12 V
Professional
3 601 J95 ... 500
V= 12
-1
min 0 – 400 0 – 400
-1
min 0 – 1400 0 – 1400
Nm 34/20 36/20
mm 7
mm 10
mm 25
mm 1.5 – 10 1.5 – 13
½"
kg 1.8
Drilling into metal: a
Screwdriving: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
English | 13
12 V 14,4 V 14,4 V
501 400 401
12 14,4 14,4
0 – 400 0 – 400
0 – 1400 0 – 1400
38/22 42/22
7 8 8
13 10 13
28 32 35
1.5 – 10 1.5 – 13
½" ½" ½"
1.9 1.9 2.0
2 2
<2.5 m/s , K =1 m/s ,
h
2 2
<2.5 m/s , K =1 m/s .
h
2 609 140 815 | (20.4.11)
18 V
300
18
0 – 450
0 – 1450
44/28
9
11
32
1.5 – 10
½"
2.1