Page 1
To buy, sell, rent or trade-in this product please click on the link below: https://www.avionteq.com/ULBTEq-UTS100-ULB-Test-Set www.avionteq.com ULBTEq UTS100 Ultrasonic ULB TESTER Operational Manual...
Page 2
TABLE OF CONTENTS 1. Introduction/ Glossary/ Description of ULB Tester 2. Operational Instructions 3. Required Maintenance / Functional Check of ULB Tester / Equivalency 4. Warranty 1. Introduction: This section provides description of UTS100 Ultrasonic ULB (Underwater Locator Beacon) Tester, operational instructions, maintenance, equivalency and warranty information.
Page 3
3. Maintenance A. Insure the 9-volt battery is at capacity prior to use. Replace with a new battery when the load voltage is dropped below 8 Volts. It is recommended to replace the battery every 6 months or after 30 hours of usage depending on the type and manufacturer of the.
Page 4
ULBTEq 7240 Hayvenhurst Pl Van Nuys, CA 91406, USA +1.310.649.0400 sales@avionteq.com...
Need help?
Do you have a question about the ULBTEq UTS100 and is the answer not in the manual?
Questions and answers