Sylvania 6615LDG Owner's Manual page 34

DVD Mode ]
PROBLEM
No picture
Disc cannot be played
No sound
No DTS audio is output
Distorted picture
Audio or subtitle language
does not match the set up
The citmera angle cimnot be changed
Audio or subtitle language cannot be
changed
"Prohibited icon" appears on the
screen, prohibiting an opemfion
CD sound dropout
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Disc cannot be inserted
Disc cannot be taken out
CORRECTIVE ACTION
• Insert a correct video disc that plays on this unit.
, Press [SELECT] to select DVD mode, then tU other DVD feature.
• Insert the disc.
, Clean the disc.
• Place the disc correctly, with the label facing back of the unit.
, Cancel the parental control or change the control level.
, Connect the audio cables firmly.
° Turn the power of the audio component on.
, Correct the audio output settings.
, Correct the input settings on the audio component.
, This unit does not support DTS audio. This is not a malfunction.
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
, Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the
DVD. (This is not a malfunction.)
, The DVD does not contain sequences recorded from different camera
angles. (This is not a malfunction.)
, The DVD does not contain audio source or subtitles in the selected
language. (This is not a maffunction.)
° That operation is prohibited by the unit or the disc.
(This is not a malfunction.)
, Scratched disc. Replace the disc with an unscratched one.
° Check if any disc is already in.
, Unplug and plug again the power cord to the outlet, and then press
[EdECT _-] on the remote control.
• Press and hold
[EJECT_ ]
on the unit for more than 5 seconds.
NOTE
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner's Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
IR SIGNAL CHECK
Use the AM radio or the digital camera to check if the remote control
properly sends out the infrared signal. It will help to define the cause of mallunction.
Using AM radiu
•Tune the AM radio to no broadcasting band.
Press any button on remote control toward the radio.
If the radio receives the signal fi'om remote control properly,
the sound will flutter.
Using digital camera
(including built-in camera of cellular phone)
•Press and hold any button on remote control toward
a digital camera. The remote control is working -_
if you confirm infrared light through the digital camera.
EN - 34 -