Advertisement
ADJUSTING YOUR MODEL
If you are using aftermarket servos, it is important to use servo horns
designed for TRX-4. The servo horns must measure 22mm from the
steering linkage mounting hole to the servo mounting hole.
FITTING AFTERMARKET BODIES
Rear Shock Tower
The rear shock tower can be installed in two different locations and
in two orientations each. This is to allow precise angle adjustment
of the rear shocks. The shock cap hollow balls can also be replaced
with offset versions (part #5355, sold separately) to further fine
tune the shock angle.
TRX-4 • 29
Advertisement
