Related Manuals for Epiq Solutions Epiq PRiSM
Summary of Contents for Epiq Solutions Epiq PRiSM
- Page 1 Epiq™ PRiSM RF Sensing • Application GETTING STARTED GUIDE V1.0.3 - MARCH 15, 2022...
- Page 2 Epiq™ PRiSM | Getting Started Guide CHANGELOG Revision Date Description Author 1.0.3 2022-03-15 Added GPS Section Gary S 1.0.2 2022-01-26 Initial Release Gary S draft 2021-10-22 initial draft Gary S...
-
Page 3: Table Of Contents
Epiq™ PRiSM | Getting Started Guide TABLE OF CONTENTS PRiSM Getting Started Guide ..................4 Connecting the Antenna . -
Page 4: Prism Getting Started Guide
CAUTION: Take care to tighten the antenna to the PRiSM unit by rotating the nut and holding the antenna stationary. Rotating the antenna to attach to the unit will damage the connector. CONNECTING TO THE DEVICE The PRiSM connects to PCs, tablets, and smartphones by a USB-C port. Epiq Solutions Proprietary Page 4... -
Page 5: Getting Started With Prism
Connect to the PRiSM by opening a browser and setting the URL to http://192.168.3.1 NOTE: Be sure to use HTTP, not HTTPS. YOUR FIRST PCI SCAN At the opening splash screen, choose the PCI Survey option. Epiq Solutions Proprietary Page 5... -
Page 6: Configuring The Pci Scanner
NOTE: If PRiSM is not licensed for any PCI scanning technologies, the PCI Survey selection will not function. CONFIGURING THE PCI SCANNER First, choose a technology or multiple technologies. 5G NR, LTE, and P25 are available based on the licensing of the device. Epiq Solutions Proprietary Page 6... -
Page 7: Viewing Data
Note that selecting many bands will dramatically slow the time to first detection. VIEWING DATA The Channel List displays discovered PCIs sorted by channel number. All entries are further divided by the frequency band in which they were found. Frequency bands can be collapsed and expanded. Epiq Solutions Proprietary Page 7... -
Page 8: Exporting Pci Measurement Data
For PRiSM units licensed with advanced scanning, measurements will be logged up to once per second. The measurements can be exported from PRiSM. From the channel list window select the download icon. Then select CSV to get the measurements in CSV format. Epiq Solutions Proprietary Page 8... -
Page 9: Configuring Gps
To configure NetGPS, be sure you're logged into the Google Play Store and Install NetGPS. It is recommended to purchase the license to get all the settings available in the app. Do so by selecting the Buy License popup. Epiq Solutions Proprietary Page 9... - Page 10 Configure the server function by setting the port number to 2947 and clicking enable. Finally, configure a PCI scan and run a survey. Switching back to NetGPS should show that there is a server connection and PRiSM is using the GPS coordinates from the device. Epiq Solutions Proprietary Page 10...
-
Page 11: Switching To Spectrum Analyzer
When in the PCI Scanner application, switching to the spectrum analyzer can be done from the configuration menu. Select the cog icon from the top right of the window. At the bottom of the screen select Spectrum Analyzer. USING THE SPECTRUM ANALYZER Epiq Solutions Proprietary Page 11... -
Page 12: Configuring The Receiver
While editing a field, you can change the units to kHz, MHz or GHz, by pressing "k", "m" or "g" respectively. Pressing will apply the value. Enter Epiq Solutions Proprietary Page 12... -
Page 13: Stepping
SWITCHING TO THE PCI SCANNER To return to the PCI scanner from the spectrum analyzer, select "PCI Scanner" from the information menu. Epiq Solutions Proprietary Page 13... - Page 14 Epiq™ PRiSM | Getting Started Guide PRiSM Getting Started Guide Epiq Solutions Proprietary Page 14...
Need help?
Do you have a question about the Epiq PRiSM and is the answer not in the manual?
Questions and answers