Gigabyte G293-S40-AAP1 User Manual page 37

G293-S43
For Slot1/Slot2/Slot3/Slot4/Slot13/Slot14/Slot15/Slot16
Follow these instructions to install the GPU card:
1. [For Slot13/Slot14/Slot15/Slot16] Loosen and remove the two screws securing the PCI cage at the
top of the system.
[For Slot1/Slot2/Slot3/Slot4] Loosen and remove the single screw at the top of the system and the
two screws at the rear of the system securing the PCI cage.
2. Pull the two plastic handles to lift up the PCI cage from the system.
3. Insert the card into the selected slot. Make sure that the card is properly seated.
4. Secure the GPU cards in place with two screws.
Top:
Bo om: Slot4 (PCIE_1_PCIE_1)
Rear
(For Slot13/Slot14/Slot15/Slot16)
Slot1 (PCIE_1_PCIE_4)
Slot2 (PCIE_1_PCIE_3)
Slot3 (PCIE_1_PCIE_2)
2
1
2
System Hardware Installation
Top: Slot13 (PCIE_4_PCIE_4)
Slot14 (PCIE_4_PCIE_3)
Slot15 (PCIE_4_PCIE_2)
Bo om: Slot16 (PCIE_4_PCIE_1)
1
- 37 -
Front