On Timer - Philips 42PF9731D - 1 Manual

EN
TV menu
TV settings
Features
Installation
Exit
Info
26
Adjust feature menu settings (Continued)
Set code/Change code
Features
.............
Sleeptimer
<
Childlock
Set/Change code

On timer

Common interface
Demo
<
On timer
1. Select On timer.
2. Press the cursor right to enter the On timer menu.
3. Select Timer and press the cursor right.
4. Select On.
5. Select Channel and then the TV channel you want your TV
6. Select Day and then a day of the week or select Daily.
7. Select Time and enter the time with the digit keys or with
8. Press the
9. Press the cursor left to return to the Features menu or
This allows you to set or change the personal 4-digit access
code that is used in the different lock functions of the TV.
Select Set or Change code.
> If no PIN-code exists yet, the menu item is set to Set
code. Follow the instructions on screen.
> If a PIN-code has previously been entered, the menu
item is set to Change code. Follow the instructions on
screen.
Enter your code with the digit keys. All number
combinations from 0000 to 9999 are valid numbers.
> The Features menu reappears with a message confirming
that your PIN-code has been created or changed.
From standby, this automatically switches the TV to the
specified channel number, at a specified time.
to switch to on a selected time and day
the cursor up/down.
key to activate.
OK
press the MENU/BROWSE
Note: From now on, every week, your TV will
automatically switch to the selected channel, on the
selected day, at the selected time, until the On timer
function is switched off again.
Note: only one On timer can be set.
key to switch off the menu.