Blinds To Go Quick Press Wand Programming Manual

Advertisement

Quick Press Wand
Programming Guide
BTG 563866
USEN_1119

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Quick Press Wand and is the answer not in the manual?

Questions and answers

John
February 24, 2025

I recharged my blinds to go window shades now the remote only operates the recharged blind

1 comments:
Mr. Anderson
February 24, 2025

The Blinds To Go Quick Press Wand remote operates only the recharged window shade because it requires power to function. The remote communicates with the motorized shade, which needs sufficient charge to respond to commands. If the shade is not recharged, it will not receive or execute commands from the remote.

This answer is automatically generated

Summary of Contents for Blinds To Go Quick Press Wand

  • Page 1 Quick Press Wand Programming Guide BTG 563866 USEN_1119...
  • Page 2 UP   DOWN  PROGRAM  Front Charging Port   Basic Operations of Quick Press Wand Command Direction Go to Upper Position Hold UP arrow for 2 seconds Go to Lower Position Hold DOWN arrow for 2 seconds Stop shade Press UP or DOWN arrow once...
  • Page 3 1. . Setting or Adjusting Shade Limit A. . Upper Limit  Hold the PROGRAM button for 5 seconds. The motor will move up and down a short distance and a red light on the motor head will illuminate to indicate the process to set up the upper limit has started .
  • Page 4 B. . Lower Limit  Hold the PROGRAM button for 5 seconds. The motor will move up and down a short distance and a red light on the motor head will illuminate to indicate the process to set up the upper limit has started . See photo below: ...
  • Page 5 2. . Setting Favorite Position The wand motor can store two favorite positions. A. Setting favorite position 1 :  Using the UP or Down buttons move the shade to your desired favorite position.  Double tap the PROGRAM button, then double tap the UP button Please note this process must be completed within 10 seconds ...
  • Page 6  Hold the PROGRAM button on the back of the wand for 5 seconds until the shade moves up and down a short distance B. Deleting Just the favorite position  Using the UP/DOWN buttons move the shade to the desired favorite position to delete ...

Table of Contents