Summary of Contents for JessEm POWRTEK SR
- Page 1 FOR USE IN JESSEM ROUTER LIFT AND ROUTER TABLE APPLICATIONS ONLY (NOT FOR HANDHELD USE) Model #05302 TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATORS MANUAL...
- Page 2 THANK YOU FOR CHOOSING Thank you for choosing this product from JessEm Tool Company. We appreciate your support and hope that our product serves you well. This product is designed to provide many years of reliable service provided it is used as intended and taken care of.
- Page 3 This manual is not designed to teach you about woodworking. If after reading this manual you still do not understand how to operate this machine safely, we urge you to seek additional information through widely available books and woodworking classes. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 4 ½” ER-20 COLLET SPEED CONTROL BOX ¼” ER-20 COLLET WRENCHES ER-20 COLLET NUT SPECIFICATIONS AC VOLTAGE 230 V (50 Hz) POWER CONSUMPTION 2400 W (INPUT) 1800 W (OUTPUT) NO LOAD RPM 10 000 – 22 000 JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 5 JessEm Tool Company. We will repair or replace the product at our discretion and JessEm Tool will return shipment to you at no charge. WARRANTY LIMITATIONS This warranty does not cover: •...
- Page 6 Keep cord away from heat, oil, sharp edges or After use the bit may be hot enough to burn bare skin. moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electrical shock. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 7 Motor is designed only for use properly secured in a recommended JessEm router lift Store idle tools. When not in use, store your tool in a or router table. This motor is not designed for use in a dry, secured place.
- Page 8 14-gauge cord can carry a higher current than a 16-gauge cord. When using more than one extension cord to make up the total length, be sure each cord contains at least the minimum wire size required. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 9 To reduce the risk of injury, use only the following router opening of the nut facing up (Fig. 2). tables and lifts with this motor. JessEm Mast-R-Lift II™ #02120, #02121 JessEm Mast-R-Lift™ #02101, #02102 JessEm Mast-R-Lift Excel II™ #02202 JessEm Mast-R-Lift Excel™ #02201 Using other tables and lifts may not properly secure the Router Motor.
- Page 10 OPERATION WARNING: Do not use this router unless it is securely installed into a recommended JessEm lift and table THE VARIABLE SPEED DIAL The variable speed dial allows the user to adjust the rotating speed (RPM) of the tool. Variable speed dial 4.
- Page 11 Feeding the workpiece with the cutter rotation is called climb cutting, which is very dangerous. Climb cutting can result in the workpiece being thrown violently out of your control at great speed. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 12 Use only specifically recommended accessories. Others may be hazardous For a complete listing of accessories, including JessEm router tables and lifts, visit JessEm at www.jessem.com or contact a distributor near you The following JessEm lifts accept the JessEm Motor with Control Box.
- Page 13 33 34 35 36 37 Exploded Drawing Model No.: 05302 Parameters: 230V 50 Hz No Load Speed: 10,000 - 21,000 RPM...
- Page 14 05300 Router Motor Explosion view Parts List Part No. Index Part No. Part Name 05300-001 Collet Nut 05300-002 1/2" Collet 05300-003 Collet Seat 05300-004 Face Plate Screws 05300-005 Face Plate 05300-006 Angular contact Spindle Bearings 05300-007 Aluminum Housing 05300-008 Inner housing Sleeve 05300-009 Armature/fan assembly Upper Bearing Seat...