Table of Contents
Advertisement
Quick Links
Installation, Operation and Maintenance Instructions
Emergency Tank Showers
• Immersion Heated (including Polar)
MH14KS350
MH14KS1200
MH14KS1200P
MH14KS2000
Hughes Safety Showers Ltd guarantees the products it manufactures or sells against defects in workmanship and material for a period of one
(1) year from the date of shipment or date of invoice, whichever is later. The product must be used, maintained and installed according to the
instructions and procedures provided, or this warranty is void. Any alteration or modification of the product will also void this warranty. Hughes
Safety Showers obligation under this warranty is limited to repair or replacement of defective products. No other warranty or remedy shall be
provided. This warranty specifically does not guarantee or cover payment or reimbursement of any damages or consequential damages other
than repair or replacement of the product.
Any claim under this warranty must be made in writing within twelve (12) months of the date of shipment or the date of invoice, whichever is later.
The owner must prepay shipping costs of all products returned to Hughes Safety Showers Ltd under this warranty. If it is determined that the
product is defective in material and /or workmanship the repair or replacement will occur, at Hughes Safety Showers option, at no charge and
return freight prepaid by Hughes Safety Showers. All other return of the product to the owner shall be at the owner's expense.
Proper use by the customer is necessary for the effectiveness of the product, as well as the safety of those using the same. The user is solely
responsible to determine the suitability of any Hughes Safety Showers product for any intended use. The user assumes all risk and liability for
use of any Hughes Safety Showers product. User specifically acknowledges receipt of proper instructions regarding the use of the product in
the original packaging and disclaims any consequential damages to person or property, damages for loss of use, lost time, loss of profit, lost
income, loss of the Hughes Safety Showers product itself and/or other incidental or consequential damages other than as warranted by this limited
warranty. User accepts the responsibility of removing from service any product that becomes worn out, unusable, unfit for the intended use or
defective in any way such as to make the product a potential safety hazard. Hughes Safety Showers is unable to undertake such obligations or
responsibilities on behalf of the user as the user is in sole possession and control of the product.
Warranty Information
Advertisement
Table of Contents
Summary of Contents for Hughes Safety Showers MH14KS350
- Page 1 Any claim under this warranty must be made in writing within twelve (12) months of the date of shipment or the date of invoice, whichever is later. The owner must prepay shipping costs of all products returned to Hughes Safety Showers Ltd under this warranty. If it is determined that the product is defective in material and /or workmanship the repair or replacement will occur, at Hughes Safety Showers option, at no charge and return freight prepaid by Hughes Safety Showers.
- Page 2 General Considerations When planning the installation of emergency safety showers and eye/face wash equipment, the advice of a qualified first aid representative or medical advisor should be sought to establish the most suitable location and procedures for first aid and decontamination. Installation should be in accordance with local legislation and industry standards such as ANSI Z358.1-2014 recommendations.
- Page 3 Where a high unregulated pressure is experienced, this must be monitored to ensure it does not exceed the recommended maximum. If the water pressure exceeds the recommendations, please contact Hughes Safety Showers for advice. The water supply pipe must be of a material compatible with the safety shower and/or eye/face wash equipment to avoid corrosion.
- Page 4 Electrical details The electrical components of the shower are wired into junction boxes positioned as shown on the general arrangement drawing. Wiring diagrams are provided with each shower and placed inside each junction box. Electrical rating (for hazardous and non-hazardous version): 110V, 1 phase, 60Hz, 1.7kW 220V, 1 phase, 60Hz, 2.5kW Different voltage versions (three phase - single phase) are available upon request.
- Page 5 Servicing and cleaning (continued) Safety showers: • Remove the shower head periodically to clean, disinfect and ensure any build-up of debris or bacteria is removed. • Remove the shower rose and replace after flushing. Tank Showers: Tank showers should be internally disinfected to combat legionella and other bacteria growth. •...
Need help?
Do you have a question about the MH14KS350 and is the answer not in the manual?
Questions and answers