Panasonic Palmcorder PalmSight PV-L501 Operating Instructions Manual page 17

Camera Recording
Before you begin...
• ConnectCamcorderto powersource.
• Insertcassettewithrecord tab (page11).
1
b,c, a,d,
B A,C D
If left in RECORD/PAUSE mode for 5
minutes, Camcorder switchesto Stand-
by mode to conserve battery. When set
to ON, Stand-by Quick Release lets
you resume recordingby pressing
two times. Stand-By
Quick Release is set to OFF at the
factory.
Set POWER to CAMERA.
... aeNu.-. ps,_ l,'Z
MENU mode. I_ 1 ,
• r ___=__,o_
Press_o J'_ , | ,
se ecl
Press _ to se ect ON/OFF [,
ON . From Stand-by mode, press _
RECORD/PAUSE two times
to resume recording.
OFF : From Stand-by mode,
set POWER to OFF. then to
CAMERA. Press RECORD/
to record.
PressMENUto exit.
For proper continuity when taping from Stop
mode or after attachinga new Battery.
A Set POWER to VCR.
aoPress _ to rewind
a few seconds of tape.
(_Press PLAY to review recording.
_Press STILL where youwant to
continuerecording.
C Set POWER to CAMERA.
D Press RECORD/PAUSE to resume
recording.
For a smoothtransitionbetween scenes if
recordingis stopped,and then staded
within 24 hours.
a.,j=
€I Press RE(_ORD/pAUSE to stop
recording•
b set pOWER to OFF and leave
cassette in Camcorder.
C To resume recording,set POWER to
CAMERA.
d Press RECORDIPAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than
24 hoursbefore recordingis resumed.
17