Berker 9490 01 00 Operation And Assembly Instructions

radio bus
Antenna for radio receiver RMD
Antenna for radio receiver RMD
Order-No. : 9490 01 00
Operation- and
Assembly Instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
The radio antenna including the antenna cable are not electrically isolated. Isolate the
antenna and antenna cable from mains voltage in a reliable manner using suitable
isolation measures.
To ensure adequate contact protection, operate device only with the slide in use.
These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

(1) Antenna
(2) Magnetic base
(3) Antenna connector

3 Function

Intended use
The radio antenna supplements the integrated antenna of the radio receiver RMD in case of
unfavourable installation conditions, e.g. a metallic distribution box.
82553111
97-09582-000
picture 1
Seite 1/3
30.07.2010